Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

durable finish

Featured Replies

im looking for a strong durable finish.  im making some small carving that are painted and in a couple spots the paint has started to chip from wear and tear.  so i need a coating that will seal and protect the surface.  i was thinking of mixing 2 part resin and diping them in the resin and then hanging them to dry.  or maybe some kind of epoxy finish if they make any that go on thin enough to stay even and not be all goopy. does anyone know of a durable finish poly is not working, shellack is not thick enough,

  • Author

adding to this again to boost back up to the top of the list.  cant find a way to finish a thick sealent on a 3d projectneed something that can be finished so that the wood will resist scraping and scratching badly in my pocket.

Duck, it sounds like you might really like the West System epoxy. They offer a great product that is easy to use, goes on smooth, and has various hardener options for different set times. If you ever need something a little thicker, they also have a filler that you can add to change the consistency. Most of the marine dealers should carry it and I know you can order it on-line.

  • Author

ok ill look info if TR every epoxy i am familiar with is rather runny and you put it on thicker how do you apply this on a virtical surface any ideas?

  • Author

http://www.walmart.com/ip/Famowood-5050060-Glaze-Coat-High-Build-Epoxy-Coating/21284649?ci_src=14110944&ci_sku=21284649&sourceid=1500000000000003260430&adid=22222222227000000000&wl0={matchtype}&wl1={network}&wl2={ifmobile:m}&wl3=21486607510&wl4={aceid}&wl5=pla&veh=sem

 

i have about 7 boxs of this stuff that i picked up for 5.00 dollers a box can this be used to brush onto the carvings and keychains im making right now?

 

any advice for working with this stuff im working in a totaly new ball game and have no expierence to work off of.         

Duck, it brushes on just like a paint. You do have to make sure you brush it out thin or you'll get a lot of runs. Andy (Boatworks) uses it a lot and could give you better advise on the application. I've used it a lot for sealing outdoor stuff like handrails and stairs. It machine sands easily and really gives you a deep finish. I've also used it on the insides of columns to seal them from moisture intrusion. I rolled it on with a short nap roller and assembled the columns later. On prefabbed columns, I actually tied a rag on a stick and mopped it on the inside surfaces of the columns.

  • Author

sounds good so TR you have any idea if the epoxy that i posted is workable for this or am i going to have to spend 30 dollers for this west system epoxy?

Duck, I've never used a pour-on epoxy, but at 5 bucks a box, it wouldn't be all that expensive to experiment a little. Just use a disposable brush on a little bit of it and see how it works on a sample. If it works, GREAT. If it doesn't, save the rest for a poured top.

  • Author

last question to get bubbles out of epoxy i was thinking that a heat gun would force the air inside the bubble to heat up and rise to the surface.  if i did that as i was pouring and spreading it out would it get rid of them and give me a smooth surface?  been playing with it and i that no matter how even i stir and pour it i keep geting tiny bubbles. so heat is going to be my next experiment.

Duck, PM Boatworks and ask his advice on this one. I've never had a bubble problem with West System and I've never used anything other than that, so I really can't tell you which way to go.

  • Author

k i will thanks TR let me know if i can every help you

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.