Nowicki20 Posted February 5, 2013 Report Posted February 5, 2013 Hello, i am in need of jointer plane. I plan on using it mostly for flattening tabletops and such. I love Lie Nielsen but the #7 is $425. After looking through the latest catalog I saw a number 7 1/2 low angle jointer for $350. I don't know much about bevel up planes, but will this do the same for me as the number seven bevel down? Does anybody have the number 7 1/2? Quote
rodger. Posted February 5, 2013 Report Posted February 5, 2013 The veritas jointer plane is a great tool. Have you considered it, or is your heart set on the LN? Quote
Trip Posted February 5, 2013 Report Posted February 5, 2013 Got one... Good performer in the right situation. I've both the standard and LA #5 and #7. The LA #5 and #7 are somewhat specialty items. As far as a 'general' plane to flatten table tops (as you mention), i'd stick to a standard bedding angle #7 (unless you work primary in species like figured maple, crotch, exotics, etc). The standard plane is place to start. Get yourself a LA later. Quote
EricFortin Posted February 6, 2013 Report Posted February 6, 2013 You also can get standard angle with a LA plane and a second blade. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.