Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Saltwater fish tank

Featured Replies

Hi

 

I am refinishing an oak plywood stand for a saltwater fish tank.  I built the tank a few years ago, and finished it with a water-based poly.  Unfortunately, the finish didn't stand up too well to the occasional drips, spills, etc.

 

After stripping the stand, I was thinking of switching to a spar varnish this time, in hopes of achieving better durability against the corrosive saltwater.  However, I've read that spar varnish is not advised for indoor use due to the fact that it never fully cures.

 

I was wondering if I could compensate for this fact by diluting the varnish 1:1 with mineral spirits and applying twice as many coats?  This would also allow me to hand rub the finish on; I've never hand rubbed a finish on before, but hope that such an application will result in a smoother finish (read: less problems with bubbles).

 

Any thoughts on how to proceed?

 

Thanks

 

 

what finish did you use?

 

boatworks a fellow guild member builds boats and he recomended recently that he often uses Crystalac Super Premium.  I have not used this finish yet so i cant say how good it is but you might want to so some research on boat building finishes and go from there.

You dont need spar, you just need a good quality finish. Any finish that meets KCMA specs will be just fine. Spar is flexible meaning that it is designed to stretch with wood and not crack. You would use it on a boat or something that is going to be exposed to both dry and wet extremes. Your aquarium stand is not going to see those extremes even with drips. If your running a sump inside your stand you just want to make sure your joints are sealed so that you dont get delamination issues and joint failure.

what finish did you use?

 

boatworks a fellow guild member builds boats and he recomended recently that he often uses Crystalac Super Premium.  I have not used this finish yet so i cant say how good it is but you might want to so some research on boat building finishes and go from there.

 

Hey guys, just saw this and wanted to clarify a minor detail.  Unfortunately I am not a guild member (yet), just a participant on this forum :D.  Regarding the Crystalac that I mentioned to Duck, that's a product that I only use on certain kinds of furniture (indoor only and usually with light colored woods where I don't want the finish to alter appearance ); I don't use it on any boat projects..  For that I stick with traditional marine finishes.. 

 

As far as your aquarium project I do think that the Crystalac would work well.  The only thing I am not certain about is how resistant it is to salt water (I'm sure the info is available on their site)   Possibly take a look at their Super Premium or the Polyoxide.  Another option would be to try this product from Pettit.  It's a marine grade polyurethane (satin finish which is what's typically used for interior furniture)..

 

I agree with Don, I don't think that a spar varnish would be my first choice.  It does cure, but it's a relatively soft finish and a high gloss may look out of place inside a house  :) 

sorry maybe i accidentally spoke out of turn didn't mean too imply that was the best finish for him or that you used this on boats. I just assumed that since you build boats that crystalac was a good water resistant finish. i also had the inspiration from talking with you and knowing that you have built boats and deal with water and wood that boat builders would have the key to his problem.  anywho let us know what you find out kaboom because who knows i might need a good salt resistant finish someday.

 

 

now the real problem if peter piper picked a pack of peppers how many pepper did peter piper pick?

Green, Red, Banana, Ghost, or spray finish?

 

Back on the original... My concern would be that you are refinishing a plywood surface.  Given the nature of plywood, I'd double check the material still has integrity before adding another finish to it.  If nothing else, you can take the opportunity to replace the top with a new one, and experiment with finish options.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.