N00b-in-training Posted February 22, 2015 Report Share Posted February 22, 2015 I was all set building a traditional outfeed table with a few storage shelves underneath until I saw Suiter's Ultimate Tool Stand (UTS). My 11x13 shop was going to have a stationary 11' Mitersaw/Mortiser/Drill Press cabinet along the back wall but after looking at Suiter's UTS I think I'm going to build a double wide UTS as a mobile outside table that can also be used at my planer/miter/router/etc table for long stock. If you haven't seen Suiter's UTS and have a small shop, check it out!! http://suiteronline.com/2005/01/01/ultimate-tool-stand/ Quote Link to comment Share on other sites More sharing options...
davestanton Posted February 23, 2015 Report Share Posted February 23, 2015 My concern is that the slots for the f-clamps will spread, at least the ones at the ends. Also, switching machines all the time instead of having a drill press and mitre saw along one wall, never needing to move either of them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.