PWRFULZ3R0 Posted July 2, 2016 Report Share Posted July 2, 2016 Anyone have a fix for this? (See photo) I just tried Perofin Knotwood oil on some damaged surfaces and it hasn't finished drying, but I can still see some damage. Would sanding help? Knotwood oil applied Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Eric. Posted July 2, 2016 Report Share Posted July 2, 2016 Yikes. Bummer. No idea, good luck. Quote Link to comment Share on other sites More sharing options...
Tpt life Posted July 2, 2016 Report Share Posted July 2, 2016 Too close... For composite I take a chemical algae treatment and let it eat. Then it takes minimal pressure. Try burnishing with friction. Looks like flyaway fibers. Quote Link to comment Share on other sites More sharing options...
PWRFULZ3R0 Posted July 2, 2016 Author Report Share Posted July 2, 2016 Thanks Shaffer, I'll give that a try Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tom King Posted July 2, 2016 Report Share Posted July 2, 2016 Looks like too narrow a nozzle, if that's how your pressure washer works. It looks to me like a 15 degree nozzle. I use a mixture of bleach and TSP. My pressure washer has an injection pickup that only works with the widest nozzle. Starting at the bottom and going up everything is soaked with the bleach solution. Rinsing is done with no smaller than a 25 degree nozzle, and sometimes wider than that depending on the surface. If your washer doesn't have an injection system, you can use a hose end sprayer. I do that fairly regularly on our dog porch pavers. Then it can be helped off with the pressure washer, but only with a fairly wide fan nozzle. I think leave it and let it wear down is the best bet too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.