Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pine Patio furniture?

Featured Replies

Anyone care to lend their expertise about finishing pine patio furniture? I love the look of BLO on just about everything but I need a lot more protection for my new outdoor creations. They will be exposed to all the elements and I want to make sure they are well protected but still have the depth and character of a BLO finish. 

 

Thanks in advance.

 

John

Hi John,

 

Not sure if this product is available in the US. If you like using oil it would be one to consider. You would most likely still need to apply once a year to maintain the furniture.

I would strongly urge you not to use pine for outdoor furniture.  It'll be history before you know it, especially with only oil for protection.  If you've already built your pieces, use the best spar varnish you can find, and I'd put epoxy on any parts that will be touching the ground.  I'd also keep them covered whenever you're not using them.  For future builds, use a tougher and more rot-resistant species like white oak, or cypress or cedar if you prefer softwoods.

Epiphanes Marine Varnish for outdoor furniture...plus one on choosing rot resistant species in the future

First of all ... glad to see another tennis nut in this group ... I play USTA league and just started again competing in senior tournaments. (50's)

 

If you "have" to use pine I would

 

Protect the end grain that will hit the floor with epoxy

 

My go to finish for exterior is Sikkens. And my favorite is Cetol 1 for the first coat and Cetol 23 for the second and third coat.

 

Pine is not ideal for exterior and there are many other species. Before recommending other species, why did you choose pine?

  • Author

Thank you very much guys, I chose pine for making up my prototype because it is readily available and as a newbie woodworker it does not break the bank for me. Luckily I have not started on the "real" pieces yet so I will look into the species more suited for the outdoors. I have never been fond of oak, so maybe cypress or cedar will be the way to go.

 

Bobby I will see if a local store has some Sikkens in stock as a quick once over of their website has me pretty impressed and yes I am a tennis nut. In fact tennis is how I make my living, I am a USPTA Coach. My clients get a good laugh over the fact that I "play" to put food on the table and my time away from the courts is spent in my workshop making sawdust. Best of luck in the upcoming USTA team season, I am sitting this one out as a player but I am co-captaining a couple of our club's teams (part of the reason I am just now able to check back on this post so late tonight, it is the proverbial herding of the cats) I will be captaining/playing on our 9.0 mixed team at the end of the summer, and if you haven't played on a mixed combo team try it out. I have more fun in that league than on any other team I played on. including college. 

 

Thanks again guys

Another great exterior product is ZAR exterior water based poly.  you can spray it or brush it on it looks great films up really nice and doesn't peal like other exterior finishes.  As for the wood Southern Yellow Pine would be fine, from there cedar, cypress, white oak, mahogany, teak, are the big ones. 

ZAR Wood Finishing - ZAR Exterior Water-Based Polyurethane - Data Sheet.pdf

Another detail to consider is feet and screw placement. If you have leveling feet or any method to keep the wood off the ground/ patio/ deck it will help extend the life of your furniture. Think about rain and weather when choosing screw locations. Any crevice that might collect water and trap it should have a path for the water to drain.

I screwed my grill table together from below up into the top. All the screws on the sides are very slightly angled up so that any water drains away. I used teak and tons of brass screws 16 years ago and it is good as new except a weathered gray patina which I like.

  • Author

Thanks dcustom I will look around for Zar and a client of mine works for Meeks Lumber (local NorCal franchise) and she is going to line me up with some cedar.

 

Wdwerker great tip about angling screws, I had not even thought about that at all, you have probably saved me another headache.

+1 on the stainless screws. I also would suggest you use some West System epoxy on the feet and use a plastic or stainless pad under them.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.