Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Restore finish on dining table

Featured Replies

We have a dining table that has a solid wood top, I think pine. It has a dark finish. We bought it used from friends 3 years ago and it has always what seems to be to be this haze on the finish. I am hoping some basic steps can restore the finish, but don't know enough to try.

It also has some light white stains from moisture/heat.

I have attached some pics.

Thank you.

Dan

post-13626-0-64698700-1362361041_thumb.j

post-13626-0-56751800-1362361065_thumb.j

post-13626-0-56841700-1362361084_thumb.j

post-13626-0-23326200-1362361104_thumb.j

Not sure any basic steps will cover it. Finish looks worn out and raw wood exposed along the sides. My vote is a total make over. Sorry, I understand that is not the answer your looking for. Any pictures of the entire top in good lighting?

 

-Ace-

Dan, from the initial pictures, I tend to side with Ace on his call. Sand it down to bare wood and start over. That will give you an opportunity to get rid of all those dents and scratches in the process.

Dan, from the initial pictures, I tend to side with Ace on his call. Sand it down to bare wood and start over. That will give you an opportunity to get rid of all those dents and scratches in the process.

 

you can use a scraper to remove the finish, a card scraper should work nicely.  or else you'll go through so many sandpaper !

you can use a scraper to remove the finish, a card scraper should work nicely.  or else you'll go through so many sandpaper !

Great point. I didn't think of it because I have yet to buy a card scraper.

Card scrapers are great but learning how to sharpen one is tricky. After many approaches I think there is a knack to it or maybe some voodoo is involved? Once you get the hang of sharpening one you can take shavings off a finish with one.

Troy, you should give it a shot they can be quite effective.( us old dogs can learn new tricks! )

LOLOL....I think you're right, Steve. I've often thought of buying a curved one to use on crown to remove machining marks.

  • Author

Thanks everyone for their replies. I should have noted that my wife likes the "distressed" look of some nicks and dents from use. However, the hazy finish drives me nuts. 

 

Here are a couple pics of more of the surface in somewhat better light. I hope they help.  

 

Dan

 

 

post-13626-0-51355600-1362612489_thumb.jpost-13626-0-66365400-1362612491_thumb.j

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.