Recommended Posts

Posted

Was checking out the sale prices online and came across this disk sander.  I've never seen this model before and the price (while not cheap) seems pretty reasonable for what you get..  Anyone have any thoughts or experience with this?  (I'm not 100% sure it's a new product which is why I'm asking :huh: )

 

Thanks!

Posted

@Eric, that Grizz looks tempting...  I've usually not really a fan of combo tools (they usually do 2 things OK, but neither one great), but for a sander I'd think that would be something pretty difficult to screw up :huh: .  I did contact CPO about this sander and they have it at the factory and can ship from there (Free).. 

 

@TRBaker, Yea, I've seen the stationary models as well but they were like $2K!!  Crazy expensive!!!  I've never noticed this particular model on their site so that's why I was wondering if I am just that brain dead, or if it was new (or at least re-introduced)...

 

Grizzly..  Hmm, ya got me thinking :P

Posted

I don't know if I could ever spend $1,200 on a stand and a motor. 

 

It looks like that's the "Regular" price <_<, but it's offered now for $560 and free shipping...  Has to be the cheapest thing PM offers :P !!

Posted

I saw Rob Cosman use one of these dedicated large disc sanders (general i believe) in one of his 30 minute videos on youtube, and i thought wow, that thing is really handy! Would'nt mind having one in the shop. Grizzly has a 15" model for $875 and after shipping over 900, so 560 is a very attractive price.

Posted

I saw Rob Cosman use one of these dedicated large disc sanders (general i believe) in one of his 30 minute videos on youtube, and i thought wow, that thing is really handy! Would'nt mind having one in the shop. Grizzly has a 15" model for $875 and after shipping over 900, so 560 is a very attractive price.

 

That's kinda what I was thinking, especially as a delivered price ;) ..  Dunno...

Posted

@Eric, that Grizz looks tempting...  I've usually not really a fan of combo tools (they usually do 2 things OK, but neither one great), but for a sander I'd think that would be something pretty difficult to screw up :huh: . 

 

My thoughts as well.  The Griz is also a half horse less in power...1HP compared to 1.5...but again...it's a sander.  You should probably hone your bandsaw skills a little if you find yourself needing to sand down an inch of material, right? ;)

  • Like 1
Posted

Basically just getting really tired of having to hold my 6" sander vertically with one hand and rotating the work piece around on the table with the other to remove blade marks -_-.  Never seem to get a square edge..  Hmmm.. Wonder why?  I know I'm not the only one that does this :P

Posted

Don't think it's new.  I know PM makes a 14, 16 and 20" disk.  The 12 is a bit small, but it should get most of what you want done... To be honest, I use my disk sander maybe once a month, but when I do, it's really the right tool for the job...  I think this one's being phased-out -- I think, but not sure, that it's the one without integrated DC port...

Posted

==> Haha, I dont always use my stationary disc sander, but when I do.....

 

Yea, maybe not the best post, but it was way past my bed time…



I sometimes need to complete a task where the disk sander seems almost purpose-made…  This week, I’ll have to make a couple hundred G&G pillowed ebony plugs. The disk sander is almost the perfect tool to apply the initial 45 bevel to the 4 faces on the ebony dowel.  I did this once by hand for about 60 plugs at a couple minutes/plug -- it took hours and left an [almost] permanent crimp in my wrist.  One day I watched a WoodWorks episode where DM performed the same task on a disk sander in under 10 seconds…  I ordered one the next Monday.

Posted

I have an 8-10 year old Delta 12" that works great.  I use it for sanding outside curves, beveling pegs, and occasionally, fitting mitered moldings.  

 

I think it was ~ $180, new at Coastal Tool, when I bought it...   http://www.toolbarn.com/delta-31-140.html?ref=base&gclid=CJOlpIrI5rUCFdGd4AodgBwAXA   Now it's $230.

 

The PM's dust collection is interesting, and it does come with a cabinet, but come on...  These are really simple tools. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 43 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined