Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

16-32 Jet what SP ready made or cut your own?

Featured Replies

I just pulled the trigger on the Jet 16-32 drum sander it comes with a compliment of precut sandpaper, my question is do people just buy the ready made sandpaper or do you just buy whole rolls and cut your own (beacase it seems to me to be cheaper doing the latter)?

I copied the exact size of the precut sandpaper on a 3" strip of 1/4" MDF . Roll out the paper on your bench, lay the template on top and clamp it in place, cut the ends with a razor knife, repeat as needed.

I have many hours experience running my original 16/32 Performax drum sander . The finer the sandpaper and harder the wood the more vigilant you must be to take tiny amounts in each pass. Keep your abrasive clean with a crepe rubber block. Full speed is for coarse abrasives or very tiny advances on the crank handle. Too fast, too fine a grit, too much thickness at once, or hard dense wood will cause a burn that is hard to remove from the wood and sandpaper! Great tool but it has it's limitations, speed being the main one.

You can surface rough sawn highly figured wood without a single tearout, but it will take several grits and a lot of time. dust collection is crucial! I love my Dust Deputy, it keeps filter cleaning down to a minimum.

  • 2 weeks later...
  • Author

Hey guys thanks for the tips and suppliers links this is the feed back I was hopeing for. My 16-32 should be delivered any day now I've got an assembly area all cleared out and, ready to go I've been holding off finishing my table top for my patio table that I'm building so I can run it through my new sander.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.