Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Moving from basement to garage...

Featured Replies

I'm considering moving my shop from the basement to the garage.  The shop would become a play room and maybe used for a few other things.  Anyway, I went through all the topics in this forum and didn't really see any solutions of how to treat power tools in the garage to prevent rust.  

 

I live in Omaha, NE, so the temps are 33/14 for Dec/Jan with 83-87/61-66 in Jun/Jul/Aug.  The humidity is all over the place through-out the year - According this site, it ranges from 40% to 92% over the course of the year - Driest time is April and most humid around August.

 

Right now the garage is host to the mini-van and it's nice to be able to get into the van when the temps are freezing or horrible hot outside.  Plus it houses all the bicycles that I've got too - another hobby of mine.  I don't know if the wife would be in agreement of having the shop take all of the garage or not - if it didn't, it could have a wet van dripping around my tools.

 

What techniques could I use on the tools to prevent rust forming on my tools?

 

Thanks, Michael

 

 

paste wax and do it farily regular like twice a year.  if you see rust start oil and sand it back right away before it can damage the metal. 

Insulation, and sheet the interior of the garage seal around the doors, and windows. I've had shops in unisulated garages the problem is rapid temprature changes when the tools have been extremely cold for a period of time than the weather warms up rapidly this causes condensation on all the tool surfaces. the insulation helps slow the temperature changes inside the envelope of the garage, less condensation. Heat would be a hit also. Maybe you could splurge, and build a carport because the introduction of the water from the vehicles will have you pulling your hair out. One other thing to consider is the concrete slab in your garage is porous so if the rain water is not directed away from the gagage the moisture will wick up through the slab.

Micheal, I live to the east of you in eastern Iowa, I wax 4 times a year and don't have trouble. My wife parks in the garage all winter and as long as I don't heat it up too fast it is fine. Make sure all of your storage that touch the floor are on treated wood. Make sure you clean all the sawdust off the cast Iron and cover it up if not in use.

Tool covers are probably a good idea.  I don't have any, (then again, I don't use my shop in winter) but the tools take at least a week of work (I'm not fanatical about hours upon hours of rust repair in a single day) before I can use them without worries again.

 

I should point out I don't have a table saw, but I do have a lathe and a drill press, that absolutely should be more protected than they are.  (Now that the snow has melted, and it was 60+ for the past two days, I've been itching to get into the shop.  Tomorrow, I plan on getting 5+ sheets of plywood, rain or shine, and having fun despite the rust.)

 

One other thing I'd consider would be tool cabinets.  1- the tools get enclosed, 2- the tools get enclosed in a product that likes to absorb moisture (at least a little bit), 3- there's now a space to throw a silica gel packet or few, and they become more effective because they are in an enclosed area.

Hello fellow Nebraska woodworker! I live in Lincoln and work in my two car garage. My wife's dripping car is parked next to my table saw right now. My garage is mostly uninsulated and the door leaks like a seive. I just use Johnson's paste wax as needed and have never had a problem with rust.

  • Author

I mentioned the idea to my wife yesterday and I'm actually thinking it would be good move to do it - although I don't think she is "thrilled" with the idea of the van living outside majority of the time.  During the bad weather (those big hard raindrops) we'd park the van in the garage to protect it.

 

Only thing is having to compete with the bicycles - I've got several - plus the boys bicycles and such too...the piles of wood that I have already downstairs and the wood haul that I have stored in the garage.

 

I'll have to start listing the pros/cons of this move...maybe it won't happen this year, but maybe in a year or so.

 

jHop - what kind of covers are you using?

I'm in Ohio. Similar climate. I just moved to the basement. I was never happy in the garage. It's nearly always too hot or too cold. Sure, that's fixable with some money and work, but then you have to wait for the climate control to adjust the temperature before working. I do things like winter backpacking in the far northern states, but woodworking in the cold is just no fun. 

 

Even though our cars were only in the garage for repairs, I felt like I was always fighting rust. Definitely get some old sheets, hemmed nylon fabric, or tool covers. I didn't have those, and snow would often blow in and land on the cast iron. Also, non-woodworking clutter eventually made my garage unsuitable for woodworking. 

All the water dripping off your van has to go somewhere. The biggest cause of rust is temp swings like those cold days when you get the shop warm to work and open the bay door to bring in materials. Or your shop is cold and you fire up the heater and warm it up quickly to start working either way both cause machines to rust.

How will the dust affect those bikes, are they fancy high tech expensive bikes? How are the temps going to affect finishing. Can you keep the shop warm enough in the winter to not only heat the shop for finishing but to also long enough to get the workpiece up to temp prior to finishing? Can you do it without selling your first born to the power company.

  • Author

The temps swings are the biggest deal - since the garage is north facing - it remains cold in the garage for a LONG time till about June or so.  I'm in the process of building some bikes (atomiczombie.com) and I worry more about the grinding of steel getting on the table tops causing rust...which if the shop moved into the garage.  All the tools would be either covered OR the grinding would occur out on the driveway, which might be better to do anyway.

 

I'm thinking that I won't be heating/cooling the garage to work in - I'd battle the temps.  During the winter, I'd consider using PVC pipe and plastic (or thin foam board) to make a house to hold the pieces to be glued/finished with a small space heater in it.  When I painted my bike, I did this and was AMAZED of the heat that was inside the enclosure. 

 

Hmm - maybe it's time to sit down and think of Pros/Cons with the wife, then post them here and see if others have things they can think of.  The two biggest concerns I have - 1) Power - how much will it cost getting a sub-panel in the garage - not doing this myself due a possible sell of the home in the future and want it done to code 2) Lighting - very high ceiling, but there are 4 bikes hanging above the area - either the bikes are going to get limited down OR will have to deal with it.

I don't currently cover my tools, much to my frustration.  Not much space to cover them, due to the restrictions on the shop size.

 

As for types of covers, here's a site that has some examples.  These are not the only ones out there, merely the first I found.

 

Regarding the foam box... this might surprise you to find out that some blacksmiths use the foam as a part of their heat box.  Particularly those who use a propane forge, they use a foam box as the replacement for the coal forge.  Here's a video of one example, but (again) it's not the only one out there.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.