Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Do you have this in the US?

Featured Replies

  • Author

Thanks PB,

 

I stock it and it's used in the UK quite a bit. I was going to use it on a build and I wanted to reference the product accurately before I start. What's the availability in the US? Can you purchase from a DIY warehouse or is it only from lumber yards? Does it have an awful reputation? Any web links would be really useful.

You can buy thinner pine from big box stores but it usually warped. I've used truck loads of the alder but no pine. The alder is popular for furniture. The only place I've bought from is tech wood. Their product is stable as it gets for slab an batten doors. It also makes good table tops.

This is their web page and the only product of this nature I use.

http://alderpanels.com/alder.html

This company supplies an species. They do retail and commercial. I buy just hardwoods from them.

http://www.awi-wa.com/

Neither have good web sites.

Thanks PB,

 

Those websites are awful! Is alder a cheap timber in the US. Never used it, soft or hard?

 

Graham

It's low priced, cherry substitute a little harder than poplar. It's easy to work with and finishes well. Clear alder is very easy to get at an affordable price.

Alder is cheap in some areas, but not everywhere.  It's $5.75/BF for 4/4 rough here, compared to $6.30 for cherry.

 

I've used some pine panels from the big box stores.  Build something out of it quick after you take the plastic wrap off before it warps all over the place.

Graham I use alder to make solid electric guitar bodies. It's an excellent tone wood that takes paint well. It's a bit like ash.

I was at Southern Lumber in San Jose the other day and they had lots of pre-glued pine panels in many shapes and sizes, so they're definitely out there. Home Depot around here carries only a few. None that I saw were 32mm thick, though; they're typically about 3/4" (19mm). To get an idea of the inventory of US big box stores, just go to the web sites for Home Depot or Lowes. Both allow you to put in a zip code, select a particular store, and see what they carry. Unfortunately, it's not always perfectly accurate for lumber, and it seems to be pretty common for people to run across things at big box home stores that are not on the web site, but it should give a good general idea.

 

I've also seen a number of places online that will glue up panels from a large variety of species and ship them to you (e.g. http://www.advantagelumber.com/solid_wood_panels.htm). No experience with that, but it seems like they might be able to offer interesting prices even if they do custom work rather than supplying from stock: doing these panels with industrial machinery like S4S molders and pneumatic clamps has got to be a lot quicker than doing it by hand.

 

One easy source of thick glued-up panels is wood kitchen countertops. Nationwide chains that sell those include Lumber Liquidators and IKEA. IKEA can't be beat for price: $129 for a 6' countertop, $169 for 8', in oak, birch, or beech, 25" (65cm) deep and 1.5" (38mm) thick. Note that unlike with their more expensive competitors, if you cut up an IKEA wood countertop, or you expose the bottom face, you're going to have a surface with some voids and irregularities. For most kitchen applications, this is no problem; the bottom is invisible, and there are almost always enough good edges. In the rare event that you have a countertop with both short edges exposed, like an island, that is not standard width, then I'd remove a section from the middle and glue the two pieces back together, preferably in a spot where most of the seam would disappear on account of a sink or stove or some such. I'm just saying all this because I've seen people online complaining about the quality of IKEA wood countertops, and I want to point out that as long as you are aware of the limitations, they're an excellent source of big, thick, solid wood glued up panels. And they're the exact same as you could get at IKEA in the UK, in case you want to get a feel for them.

  • Author

Thanks all for the feedback. I had a look at Home/Depot and Lowes and they will provide a good reference. I had not thought about Ikea. I like your attitude srzsrz about finding the appropriate tool/wood for the job. 

  • 5 weeks later...

As an aside on Alder: I worked on a tree thinning/planting crew in 1971, reforesting part of a huge old forest fire in Oregon (the Tillamook Burn). We girdled and poisoned thousands of Red Alders, some up to 2 feet in diameter, because they shaded the young Douglas Firs. Alder was considered a "weed" tree. It is gratifying that this very nice species is now being harvested and used, rather than burned as undesirable waste.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.