Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

finish for reclaimed oak dining table

Featured Replies

My wife and I bought an older house last year and as we were doing remodeling I noticed that the studs in the walls were oak.  Since we were removing several portions of the walls, I saved as many of the studs as I could.  I am now in the middle of making them into a dining table table-top.  post-13934-0-04071400-1367103022_thumb.j  I've started the process of joining and gluing up the table top and am working on finalizing my design in sketchup.  It will be a trestle style table, similar in look to the table shown here (minute 4:22): 

will open with equalizer slides to hold 4 leaves, which I am planning to store under the table top between the slides.  (as an aside, will standard soft-maple equalizer slides be ok of this heavy of a table top?  I'm currently only planing them down to 35mm thickness - just over 1 3/8", sanding will bring it down further, but not much)

 

My question is what is going to be the best way to finish the top?  In the past my dad and I have just used a stain and/or polyurethane on various projects, usually applying multiple coats of poly with a brush.  But, I just watched the simple varnish finish video and am wondering about a wipe-on finish and how many coats it might take?  (he also mentioned the 1/3, 1/3, 1/3 recipe as NOT appropriate for dining tables, so what about the standard wipe-on finish?)

 

More information:

For my personal taste and also because of the surroundings, my plan is to stain this a darker brown color before sealing it.  I don't mind the rustic/farmhouse look at all, so imperfections are fine (heck, you can see in the picture that one of the studs has a hole in it from where electrical wire was run through the stud).  That said, I do want a finish that will be easy to clean, i.e. no divots that will trap food, dust.  Also, my sense is that a satin finish might be best, but I am open to suggestions. 

 

So, what is going to be the best way to fill in any holes and what kind of finish do you guys recommend?  I have 3 small children, so good protection is required.

 

Thanks!

 

Tim

Drill the hole out with a forstner bit and use a plug cutter to cut a cross grain plug from a similarly grained scrap and glue it in. I drill a hole in a scrap and then clamp the scrap over the hole so the bit is controlled and guided when I drill a hole out to a bigger and cleaner size.

I have been happy with the higher quality water bourne finishes on tabletops, but the brand I use is only sold to professional shops.

Tim, it's been my experience that the maple slides tend to sag on the longer tables. Rockler offers some heavy duty steel slides that solve that problem.

Hi Tim, nice project. Do you have the ability to spray on a polyurethane finish? Maybe varathane's floor product in satin, good durability with a lower sheen.

  • 2 weeks later...
  • Author

Thanks for all the feedback!  I looked on Rockler's site and I didn't see any steel equalizer slides.  Do they only make standard slides in steel?

Thanks for all the feedback!  I looked on Rockler's site and I didn't see any steel equalizer slides.  Do they only make standard slides in steel?

 

They dont have the equalizer slides in metal. I would not use metal slides they are cheap and tend to sag and twist. Osbourne make great equalizer slides and still uses the good old school rack and pinions, not the lame pot metal seen today.

Regarding a finish that is easy to clean, oak can be filled but that's a lot of work. I'm not even sure you would want a piano-smooth finish on rustic. You can sand the oak until there is only a small amount of texture; no divots. I recommend using a Minwax Gel Stain. It contains pigments to emphasize the grain and a dye to color the wood. For a finish, a polyurethane will react with alcohol. If you drink wine, you may want to consider a satin precat lacquer finish. It cleans up easy and if you use a spray, its easy to apply. I've used Gemini Gem Coat in an inexpensive spray can. A couple $6 cans would probably be sufficient for a table.

 

-Randy

finewoodfinish.blogspot.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.