kardar2 Posted April 29, 2013 Report Posted April 29, 2013 Hello, I saw this for the first time that Harbor Freight sales a saw blade sharpener. http://www.harborfreight.com/catalogsearch/result?q=saw+blade+sharpener I always just buy a new blade. I know you can pay to have them resharpened but I just throw them under the bench. I should take them and sharpen them. if take them to a saw shop they probably use the same machine. do any of you use this? thanks Quote
dwacker Posted April 29, 2013 Report Posted April 29, 2013 if take them to a saw shop they probably use the same machine. do any of you use this? thanks Not even close. Most use large cnc lubricated machine. I wouldnt even think about it. Quote
G S Haydon Posted April 29, 2013 Report Posted April 29, 2013 As long as your blades are of a good quality send them to be sharpened. If there cheapies you could view them a disposable (I just shivered writing that last bit) Quote
duckkisser Posted April 29, 2013 Report Posted April 29, 2013 even a cheap blade its cheaper to get them sharpened. just took a bunch of 40 tooth blades in to get sharpened and it cost me 10$ a blade. they cost 23-30 dollers for the cheap ones so less then half the price to get sharpened and i can probably resharpen twice a year at most. and since i can sharpen these 4-5 times and then there done im looking at on average replaceing my blades every 2-2.5 years sooooooooo rather just sharpen then spend the extra green. and if i had a expensive blade well duhhhh ya need to sharpen rather then spend 100$ to replace them Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.