Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Light wood with padauk, is there any finish that will not bleed?

Featured Replies

Lacquer, shellac, and oil/wax all cause red to bleed from padauk and when it's next to a light wood it makes a mess. I'm about to give up mixing it with other species but I've seen it done and looking great. Anyone care to share a few secrets?

Are you able to seal the individual pieces before assembly?  If so; after sealing, assemble THEN continue on with the finishing process. 

 

Just a thought...  Never worked with padauk,,

  • Author

I could blue tape the glue edges, pre-finish, and probably be fine. The bigger problem is I almost always want to do some sanding or planing after glue up and then I'm back where I started. So the glue-up would have to be spot on.

this does not help your problem much but I worked with some oak and paduke turnings where I used a wax to help sand and to be a finish on the bowl.  the bleed over went with the wax and ended up filling the spaces of the oak so the spaces in the oak turned the same color as my paduke.  actually looked nice the red bowl with a oak rim with paduke colored highlights in brown of the oak.

Have you tried spraying?  I can't imagine the bleeding could be that bad with a couple light coats of SealCoat, then proceed as desired.  

Funny, I just did a white maple table with padauk breadboard ends.  sorry, spray is your only hope.  even with spray, you get a very slight bleed, but it's too slight to notice.  you can always pre-finish.

  • Author

That was my experience with spray lacquer, still some light bleeding, red sort of wicking into the other wood.

Deos it do it with a waterborne finish? I have not worked with padauk so i do not know, and given i only use waterborne finishes now it would be cool to know if and when i get a project that calls for padauk.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.