Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Oil/Varnish blend question

Featured Replies

Hey Guys - Usually for finish I make my own oil/varnish blend with boiled linseed oil but I've recently started making these coffee stands and need some more of a film protection for water. I'm really not a fan of thick film finishes however and am looking for advice on an in-between type of finish that keeps the properties of oil but adds more protection. Any ideas? Also, here in CA we can't get Arm-R-Seal so that's out of the question.

I'd recommend doing a coat of blo and then several coats of a custom wiping varnish. The oil will pop the grain, and the varnish will give you the protection.

I'd drive to Tijuana or Vegas and buy a case of Arm-R-Seal.  :P 

 

You can still use your own shop-made soup, just adjust the ratio according to how thick you want the film and in how many coats you want to get there.  I might do the first couple coats with your typical equal parts BLO, poly and mineral spirits, then for subsequent coats, lose the BLO and try just 2:1 poly/mineral spirits.  That'll build up a film pretty quick.  If it's too thick to wipe on easily, keep adding a little MS until you get the right consistency.  I don't see the advantage of using BLO in the mix after the first coat or two...the wood has already soaked up all it's gonna drink...it just slows down the drying and requires a longer wait between coats.

I understand CA is restricting VOCs (We are starting the process in NJ as well -- you can't buy oil-based paint anymore)...  What's interesting is that you can't get Arm-R-Seal, but you can get the components.

I bought up the last few cans of Arm R Seal from General Finishes in the UK last June 2012 before the silly VOC ban came in dictated by Europe. I can't drive over to Vegas to buy any more when I run out of mine :(

I've been forced into using waterbased products from GF instead and have found Exterior 450 a good wiping finish. You can spray or brush it too. Also Enduro Var is very good and gives an oil like finish but I believe it can only be sprayed or brushed. Not tried wiping it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.