Jeremy German Posted June 12, 2013 Report Posted June 12, 2013 I'm building a router table out of oak ply, this is my first cabinet of any sort. I've kept everything flush up front but due to small errors here and there I'm going to need to flush things up on the back before I attach it. Do I need a belt sander to rapidly remove that material? Or is a random orbital sufficient with an aggressive paper? If a random orbital will do I was thinking of going Festool, I've been wanting to upgrade my Bosch to the ETS 125 or 150 (I haven't done the research to see what I should be getting in that arena yet). Quote
pghmyn Posted June 12, 2013 Report Posted June 12, 2013 I can tell you that the ETS150/5 with 80grit paper can really remove some material with ease. Are you sanding the plywood edge or face? I'm concerned with sanding through the top veneer. Could you take a picture of what you are trying to do? Quote
Jeremy German Posted June 12, 2013 Author Report Posted June 12, 2013 It's the edges, I'm not sure what to do to make the top veneer smooth when it comes time for that because of the risk of sanding through. I'm not totally sure it's necessary for this project, but if I have to correct mistakes like this for cabinets in the future it's good to know. I can grab a picture as soon as I can get out into the shop if that helps. Quote
Tpt life Posted June 12, 2013 Report Posted June 12, 2013 How much material are we talking? I have seen belt sanders and orbitals both rip some of the ply out at times. Quote
dwacker Posted June 12, 2013 Report Posted June 12, 2013 I can grab a picture as soon as I can get out into the shop if that helps. That would help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.