woodbutcher74 Posted July 4, 2013 Report Posted July 4, 2013 Ordered one of these the other day from Peachtree. Discount and free shipping!! Only $80.00. Any reviews on this device. The reviews on the website are good, of course. Quote
wdwerker Posted July 4, 2013 Report Posted July 4, 2013 I haven't used it but it appears to be an accessory to make a plunge router act as a lift while it is suspended in a table. So how well it works will be dependent on the routers plunge mechanism. Read the instructions carefully before you install it. Peachtree is near my home. I have found them to be quite reasonable on returns and missing parts. Send me a message if you run into any problems. Quote
woodbutcher74 Posted July 4, 2013 Author Report Posted July 4, 2013 Hey thanks. I lived in Acworth for about a year back in the eighties. I lived on Belles Ferry Rd. I'm sure that area has changed a lot since then. Used to go to a place called Buffalo's over by Roswell. They had great wings and the coldest beer in town. Quote
Beechwood Chip Posted July 5, 2013 Report Posted July 5, 2013 I believe that I purchased this. It's a kit that contains parts that you can use to convert a plunge router into a router lift for a router table. The kit includes instructions for several popular plunge routers. I never got around to trying it. Quote
Chris H Posted July 5, 2013 Report Posted July 5, 2013 It will depend on your router plunge mechanism. I had one, and returned it. It worked on my Ridgid plunge router but the way the plunge mechanism is designed, it could not bring the router above the table to make bit changes. The plunge contraption is designed not to let the collet plunge deeper than the mechanism. So nothing wrong with the Raizer per say, but a potential flaw in the opportunity it provides, at least for the Ridgid 1.75hp model. I ended up building my own lift for about $30 worth of hardware and lumber. You can see video on the basic design here, and I think download his plans for $5 if you want to make the exact same model he did. His personality can get a bit much, but his design and function of his shop jigs are pretty top notch. Quote
woodbutcher74 Posted July 6, 2013 Author Report Posted July 6, 2013 Received my Router Raizer yesterday and started to put it together. I have a Craftsman router mounted in my table. Instructions were fairly clear and easy to follow. (If you decide to get one of these make sure you inventory the parts before you start). After a couple of minor adjustments, I had it up and running. Despite having a couple of missing parts I was able to improvise and was impressed with the ease of operation. Sure beats having to reach underneath the table to make adjustments. Sure it's not as cool as some of the motorized units and it has some limitations but it sure makes my time in the shop a lot more enjoyable and only cost me $80.00, instead of $200-$300 bucks. Now I have some extra cash for either another tool or some nice lumber for another project. Quote
slachammer Posted July 21, 2013 Report Posted July 21, 2013 what model craftsman router? I was debating getting one but wasnt sure if it would work with mine Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.