JordsWoodShop Posted July 6, 2013 Report Posted July 6, 2013 Having recently upgraded my big dust collection system to have a cartridge filter, I decided that I would try my hand at making myself a cyclone separator as an attempt to protect the new filter as best I could. This worked surprisingly well so I decided I would make a second, smaller unit and show you how it was made. This cyclone was build for under $50 and as you will see in the last video it works surprisingly well. Plans available at: http://www.jordswoodshop.com/cyclone-dust-seperator/ Part 1 Part 2 Part 3 Quote
davestanton Posted July 6, 2013 Report Posted July 6, 2013 Wow! Great to see another Aussie on the forum. Great stuff Jord, love it. I learned something today watching your video, the heat gun trick on PVC pipe...thanks heaps. I see you have a few of our carbatec machines around your workshop also. Quote
mar10 Posted July 8, 2013 Report Posted July 8, 2013 Hi Jord Great Job! I have attached some information about sheet metal pattern development that I hope you will find helpful on future projects. These are 3 different ways of making a truncated cone. The first 2 are “Radial Line Development” and “Triangulation”. The 3rd method is a jig made in the field referred to as “rollation”. You can use this method on round to round, square to round, offsets, ovals, etc. The first step is to make a half pattern as shown in the picture. Then place the pattern on its side and scribe the length of that side. Then as you roll the pattern, continue to scribe the arc until you reach the other side. Then scribe the last side. I may be a little rusty considering that the last time I made a cyclone was in 1968. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.