dherbert Posted July 28, 2013 Report Posted July 28, 2013 Is this going to work OK? I bought this CMT bit over a year ago with the idea of using it to plane wood, not noticing the negative rake at the time. It was cheap,$15 and a comparable size bit here would run me $65 or so. I am going to try it in a week or two anyway, but am wondering what to expect. It does have a bearing the same size as the cutter,an inch and a half,between the cutter and the shank. If not for surfacing, what might it be useful for? Thanks, David. Quote
wtnhighlander Posted July 29, 2013 Report Posted July 29, 2013 Bits with a bearing between cutter and shank are often called "pattern bits". Typically used to follow a thin plywood or hardboard pattern t shape the outline of the workpiece underneath. Quote
Tom King Posted July 29, 2013 Report Posted July 29, 2013 When using a router bit to surface wood, it will probably surprise you how few square feet can actually be done before the bit needs sharpening. I had to mill off the top 3/4 inch of about 120 square feet of old flooring. I bought three Whiteside bits, and kept one in the mail going back to Whiteside, while another one was on the way back, to be sharpened all the time. A cheap bit isn't worth the effort for surfacing. It might last a couple of hours. http://www.historic-house-restoration.com/images/ElamsHouse_Oct._2012_036.JPG Quote
dwacker Posted July 29, 2013 Report Posted July 29, 2013 Sound like a mortising bit for hinges. Quote
dherbert Posted July 29, 2013 Author Report Posted July 29, 2013 I found out that my bit is called a Dadoe/Planer bit and surfacing is just what it is designed to do. Thanks,everyone. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.