Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

$10k - 15k tool budget

Featured Replies

I am reading all of your replies on my phone and absolutely love and appreciate everyone of them. When I can get to my computer I will answer some of the questions. How is grizzlies quality compared to other tools? What Paul has added to the cart really would revamp and work wonderfully in my price range but also don't want to settle just to get all the tools at once. I don't know how grizzly's quality is. I have not seen much of their equipment in person. Again, I will reply again when I can get to a computer.

My table saw was pretty close to dead on right out of the box. One of the wings has a dip in the middle that is about 1-2 thou. Just barely caught my x-acto knife when I dragged it across. I haven't tried to fix it because the front and back lined up perfectly. So I don't mind. The fence is extremely strong, and will not move. There have been reviews that the plastic sides are a bit warped from the screws being over tightened. Easy fix if that is your case.

 

The jointer took some time to fine tune. The knives were perfect in the cutter head. No issue there. Another user (Freddie) had issues with his model and the fence. It was warped, and he eventually settled on another model from Grizzly. As far as I recall, he was pleased with their customer service.

 

My tables are dovetailed ways, and a bit trickier to align. I can tell the the far end of the outfeed table is a little off, but we are talking just a smidgen. Nothing I can't clamp straight. I just don't want to fiddle with aligning these tables. If you got a parallelogram machine it would be a lot easier for you.

I have to disagree about the last couple theories posted. You buy a dust collector to match your machines and anticipated future purchases along with the space that the shop is located. A table saw is just as much for chairs as the bandsaw. If your going to do loads of sheet goods that has nothing to do with a table saw but more about what your comfortable with. Personally I cut sheet goods all day on a regular table saw but many would not hear of it thinking its to unsafe thus making some sort of slider or track saw a needed option. I can understand buying specific tools based on what a guy does but really how many guys only do one thing. Its nice to have a nice selection of standardized stationary equipment that you can count on for any project that may come.

 

You know, you're absolutely right. I don't see how I could have made these mainly square/rectangular things without a table saw:

 

Sharpening table, which was my very first project:

 

9619483874_0880b1cf23_c.jpg

 

Drill press stand/storage unit:

9616239097_ffcc8642f7_c.jpg

 

Chessboard (applied veneer on MDF, solid walnut edges):

9616236853_e61aa11f74_c.jpg

 

Workbench, as well as installing the paneling and my tool storage:

 

9619480826_cc863002b4_c.jpg

 

Low sawhorses:

 

9619483282_a82b7e7812_c.jpg

 

Turning tool rack:

 

9619482586_7eb12ac686_c.jpg

 

William and Mary Bible box:

 

9619480358_627dc64aec_c.jpg

Oh, wait — I forgot. I don't have a table saw.  ^_^

 

My point is not that we should all do woodworking without a table saw, even though I seem to be doing fine without one, and I don't ever see myself buying one. My point is that there is no tool, even a table saw, that is universally applicable for all situations. And before you spend a lot of money on a tool, you should first have a use in mind for it. If you decide your first project needs a table saw, then go ahead and get one, along with any other tool you'll need for that project. If you decide you want to make that project a different way, then get a different set of tools. But decide on that first project first, because a table saw won't be of much help in making one of these:

 

9616253901_db4d9057ef_c.jpg

 

Actually, woodturners do use table saws. A table saw makes a great storage platform for bowl blanks.  ^_^

Like the chessboard -- i'm just spraying a chess/gaming table myself.  I edged the gaming surface in ebony, then a 3" surround in genuine mahogany...  The top sits atop a 29" table base in genuine mahogany with a couple of drawers for game pieces...  The bible box is nice -- is that walnut burl on MDF?  Without a table saw, do you hand saw everything and/or bandsaw?

Thanks! The Bible box is solid walnut, dovetailed corners, with walnut burl with walnut edge banding. I use hand saws and/or a bandsaw as appropriate, and clean up the edge with a plane.

 

Just to drive the point home as to how there's no one universal way to do anything, and therefore no one tool that everyone needs, the Bible box was made entirely with Japanese hand tools, except for the turned feet. And even though I'm a big fan of Japanese tools, I'll be the last person to say, for example, that everyone should use Japanese chisels.

  • Author

..back to the tools.

 

 

==> Let me first start by saying I have a full hobby shop right now

 

Please list your current tools... Any solution will be some mix of new and old...

 

10" Delta table saw (30" fence)

6" Delta jointer

Dewalt Planer DW735

Bench top drill press (older model)

14" Rigid Bandsaw - I feel this model is a bit cheap...

HF oscillating spindle sander

OLD OLD sanding station (disc and belt sander)

Lowe's brand miter saw (lack accuracy and quality)

3HP PC router in a Incra table with fence

Multiple routers

Couple sets of chisels 

PC ROS sander 

HF Dust collector with shop built seperator and a .5 micron filter.

 

Pry forgetting some stuff

 

 

 

 

==> I use a lot of sheet goods but am wanting to focus more on milling from rough cut lumber and focus on solid wood construction.

 

Do you have a list of your near-term and mid-term projects?  The size/type of projects is going to be a factor...

 

 

==>  I am a hybrid woodworker!

 

How much of a hybrid woodworker?  For instance, if you want to go down the path of more hand work, will you start making mortise/tenon with hand tools?  If so, then you don't need a mortiser... etc.

 

I do everything with power tools and fine tune with hand tools if needed. I would like to have a full set of hand planes, especially to speed up surface prep before finishing.

 

 

==> focus more on milling from rough cut lumber

 

What are your starting materials?  Do you see yourself really getting rough lumber or are you talking S2S?  Getting rough lumber and milling it yourself would place more emphasis of jointer/planer... Maybe you'll decide to source S2S and scale-back the J/P.

 

Now that I think about it my lumber supplier sells S2S

 

Finishing: any interest in spray kit?

 

I have rocklers HVLP system... cheap but a good start to peek interest.

 

 


 

I would not be thinking about furnishing a complete shop with that small of a budget. I would concentrate on the stationary tools and throw every dime at them. The small stuff can come later. Its easier to save a few hundred bucks for that small power tool or hand plane than it is the few grand for the machine. 

My Budget for my shop was 51 I spent 34 of that on stationary equipment. I would guess if you stay away from saw stop and head over to grizzly you could get a nice cabinet saw, 15 or 20" planer, 8" jointer, decent bandsaw, drill press, dust collector,drum sander and 3hp shaper while being close to your budget. 10K budget. Now if you can squeeze out 15 then you can easily throw in plenty of extras that will put the icing on the cake. Below is just an example of what I'm talking about.

 
To Buy Now Price: Quantity: g1023rlx.jpgG1023RLX - 10" 3 HP 220V Cabinet Left-Tilting Table Saw
Item added on Wednesday August 28, 2013
Price:  $1,495.00 Freight:  $150.00 Total:  $1,645.00 g0453.jpgG0453 - 15" Planer
Item added on Wednesday August 28, 2013
Price:  $1,050.00 Freight:  $150.00 Total:  $1,200.00 g0490.jpgG0490 - 8" Jointer with Parallelogram Beds
Item added on Wednesday August 28, 2013
Price:  $925.00 Freight:  $150.00 Total:  $1,075.00 g1066r.jpgG1066R - 24" Drum Sander
Item added on Wednesday August 28, 2013
Price:  $1,595.00 Freight:  $99.00 Total:  $1,694.00 g0513x2.jpgG0513X2 - 17" Bandsaw 2HP w/Cast Iron Trunnion
Item added on Wednesday August 28, 2013
Price:  $1,050.00 Freight:  $99.00 Total:  $1,149.00 g7948.jpgG7948 - 12 Speed 20" Floor Drill Press
Item added on Wednesday August 28, 2013
Price:  $655.00 Freight:  $99.00 Total:  $754.00 g0441.jpgG0441 - 3 HP Cyclone Dust Collector
Item added on Wednesday August 28, 2013
Price:  $1,395.00 Freight:  $99.00 Total:  $1,494.00 g1026.jpgG1026 - 3 HP Shaper
Item added on Wednesday August 28, 2013
Price:  $1,095.00 Freight:  $99.00 Total:  $1,194.00 Add coupon or pricing code:
 

Do you need liftgate service?  What's this?btn_addliftgate_c.gif
Merchandise:  $9,260.00 Freight:  $945.00 **Subtotal:  $10,205.00 btn_continueshopping.en.gif

 

I like this, a lot! Great total price and the full shop will be outfitted. How is grizzlies quality? 

 

One thing I should mention is I do not take pleasure in setting up tools (who does?) and tuning them. I have short patience and tend to rush through these things and fail to do a good job. I like any upgrades that make it more convenient to setting up, tuning, keeping them tuned to be highly looked at. Upgraded cutter heads, parallelogram jointer, ect ect... or am I off on this?  

 

 

 

I am a person that when I do something, I do it 100%. I would like to purchase tools that are high quality. What about if $15k was the first go round and spend that on half of the tools. Then another $15k a few months later?

 

Particle Board... what cart would you create with two allotments of $15k? for a total of $30k? (doesn't need to be grizzly)

==>I like this, a lot! Great total price and the full shop will be outfitted. How is grizzlies quality?<==  Quality is tricky to quantify, since every persons experiences / thresholds are different.  In my opinion, once you are into Grizzly level tools, you are talking about a tool that will out last you (baring some medical miracle to greatly extend life).  So quality from this point up, is more about your grand kids vs your great, great grand kids having issues.  I honestly don't know if my kids or any future generations will even care about woodworking, so that isn't a factor for me.  Just my thoughts though.    

 

I have never had a problem with their tools.  I know several guys who have a shop full, and they swear by them.  However, if you browse the interwebs, I am sure you can find disgruntled customers.  I know the overwhelming reviews are that they are very high quality especially for the price.  The other big + for Grizzly is their reputation for fixing things that are wrong.  They sell great stuff, but when there is an issue, I they are well known for going out of their way to make sure you are made whole.  Not all companies out there are as concerned with this. 

 

 

==>One thing I should mention is I do not take pleasure in setting up tools (who does?) and tuning them. I have short patience and tend to rush through these things and fail to do a good job. I like any upgrades that make it more convenient to setting up, tuning, keeping them tuned to be highly looked at. Upgraded cutter heads, parallelogram jointer, ect ect... or am I off on this?  <==

 

Unfortunately, I don't think there is anyway around it.  A whole shop of tools is going to mean lots of setup time.  You will definitely save some setup/tune up time by going with a brand like Powermatic.  But, keep in mind, anything that requires some assembly, is going to take some tuning.  Grizzly machines typically (read: ignorantly broad generalization) are known for being a bit more work to tune up, but they stay true very well after setup.  So there is a small up front investment of time, but you will not need to constantly tune up like you would with a HIC brand.  You will easily blow your budget on 1-3 Powermatic tools, so setup time vs tool quantity is a personal decision.  There are other differences of course, but you need to figure out just how much you hate setup and what that is worth $$$.

..back to the tools.

 

 

Particle Board... what cart would you create with two allotments of $15k? for a total of $30k? (doesn't need to be grizzly)

 

You can easily spend the whole thing on PM tools and have better than grizzly. Grizzly is the low end of spectrum it sort of seems to be no real middle ground. My bet is you could get everything you need in the PM brand for less than your 30K. The total is just over 22 so for 30 you could step things up.

 

To throw a wrench into the mix if I was dong this as a hobby I'd skip all of them and buy a Felder CF531 pro for about 20 add a laguna bandsaw and a woodmaster drum sander. That is a perfect hobby setup. You get alot for your money. Great cutter heads, super jointer, planer, shaper, mortiser all in a tight well built package.

==> To throw a wrench into the mix if I was dong this as a hobby I'd skip all of them and buy a Felder CF531 pro

 

Funny, I was going to suggest that, but not the Pro-line.  At one time, I had about 600sq ft for a shop and the Felder combo fit right in.  Great machine, but the 5 and 7 series Pro-line machines would blow the budget... Now the Felder/Hammer C3 C-series might just fall withing budget....  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.