Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

$10k - 15k tool budget

Featured Replies

Good evening all,

 

I will be moving into a new shop in less than 4 months. It will most likely be a 2 stall section of a 3 stall garage. I have a $10,000 fund to purchase all new tools, gadgets, and gizmo's. 

 

Let me first start by saying I have a full hobby shop right now, contractors delta table saw. dewalt planer, delta jointer, bench top drill press, and HF spindle sander. I am looking to upgrade and expand my larger power tools. I am asking you to give your pro's and con's and to somewhat put together "the list" of tools you would put in my shop. In my current (old) shop (1.5 stall garage), I was very tight on space. My workflow was very slow due to moving and setting up the next tool needed. I use a lot of sheet goods but am wanting to focus more on milling from rough cut lumber and focus on solid wood construction.

 

Please copy and paste the list of tools (along with you additions) into your reply and express which tool I should purchase...

 

List of tools off the top of my head (the list will most likely be over budget, and probably purchased as the funds come in). 

 

  • Table saw (Thinking Sawstop 3HP with 30" OR 50" rip?)
  • Jointer
  •  
  • Planer
  •  
  • Miter saw (kapex?)
  •  
  • Band saw (maybe two?)
  •  
  • Disc and belt sander
  •  
  • Oscillating spindle sander
  •  
  • Lathe
  •  
  • Full size drill press
  •  
  • Domino
  •  
  • Cyclone dust collector
  •  
  • Collection of hand planes

 

List of tools off the top of my head (the list will most likely be over budget). 

 

Jointer

 

Planer

 

Band saw 

 

Disc and belt sander

 

Lathe

 

Full size drill press

 

Cyclone dust collector

It's in the right section - outfitting or upgrading a shop.

 

Didn't put a ton of thought into it but I quoted and edited your list.  Perhaps on another occasion I'll take a closer look and see if I have anything to add.

  • Author

It's in the right section - outfitting or upgrading a shop.

 

Didn't put a ton of thought into it but I quoted and edited your list.  Perhaps on another occasion I'll take a closer look and see if I have anything to add

 

Byrdie,

 

What tool model/brands would you pick for these tools? I guess that is my main questions... I just don't know what machines to buy..

A few considerations in your new shop.

 

Power - Is 220 there?  All 110?

 

Space - Is this shared with anything else or dedicated?  Dedicated stationary equipment or on wheels to get it out of the way?

 

Small Power Tools - With the exception of the domino, you don't list too many wants/needs

  • Author

A few considerations in your new shop.

 

Power - Is 220 there?  All 110?

 

Yes, I plan on having 220. Well hoping...

 

Space - Is this shared with anything else or dedicated?  Dedicated stationary equipment or on wheels to get it out of the way?

 

I would like to have everything stationary and the shop planned out to optimize work flow.

 

Small Power Tools - With the exception of the domino, you don't list too many wants/needs

 

I am not sure! Open to all ideas and suggestions!

Byrdie,

 

What tool model/brands would you pick for these tools? I guess that is my main questions... I just don't know what machines to buy..

I'm not a good one to ask.  I'm not a brand loyal or specific kind of guy.  I prefer to consider the type of work I intend to do, the size of the space I have to put the tool in, how much is in the budget for that specific tool, what's available from the suppliers I prefer to use and whether I'm willing to wait for something to ship in or need it quickly enough to find a local supplier.

 

The color of the paint on the outside, the name of the manufacturer or what their logo looks like doesn't mean one whit to me.

  • Author

I'm not a good one to ask.  I'm not a brand loyal or specific kind of guy.  I prefer to consider the type of work I intend to do, the size of the space I have to put the tool in, how much is in the budget for that specific tool, what's available from the suppliers I prefer to use and whether I'm willing to wait for something to ship in or need it quickly enough to find a local supplier.

 

The color of the paint on the outside, the name of the manufacturer or what their logo looks like doesn't mean one whit to me.

 

This I 100% agree, but I am only a small hobby shop with only 3 years of experience. I need the experience of my fellow WTO'ers to give their opinions on what machines are a good choice? individual models would be wonderful!

I'm not a good one to ask.  I'm not a brand loyal or specific kind of guy.  I prefer to consider the type of work I intend to do, the size of the space I have to put the tool in, how much is in the budget for that specific tool, what's available from the suppliers I prefer to use and whether I'm willing to wait for something to ship in or need it quickly enough to find a local supplier.

 

The color of the paint on the outside, the name of the manufacturer or what their logo looks like doesn't mean one whit to me.

 

For the most part, I agree with Byrdie.  It's very different for each person based on their likes, wants, and abilities.

 

So, for me, if I had your tidy sum to play with...  I would probably place my more expensive needs/wants at the top of my priority list.  Yep, I make lists... :)

 

Thinking of workflow, my dust collector, table saw, jointer, and planer would be the first items on my list.  Funny how those are probably the more expensive items.. 

 

Next up would be a good router table and workbench.

 

You could easily spend your entire amount and never come close to filling that list.  So, it comes down to doing your homework and see what you want and what you can afford.  Do the current items need/have to be replaced or can you upgrade them for less?  Maybe a killer fence and a new blade on that Delta table saw will keep you happy for a few years?

 

As for particular manufacturers, like Byrdie, I'm not loyal to any particular one.  Again, you'll need to do your homework.  Example:  I recently purchased a Powermatic 54A Jointer.  Being limited to 110 power and space, I really couldn't get much bigger.  The other option for me was the PM 54HH with the helical head.  For what I do (and the price to replace the cutters), I just couldn't justify paying the extra couple hundred for the HH.  I still spent that money on that trip but, I used that money for items on my priority list that were in that price range.

 

Sorry, I know I've probably confused you more than helped you.  If you ask people here which table saw they like best, you're going to get a bunch of different answers and still have to do your own research. 

 

Good luck and, to be honest, I wish I was in your shoes as I know exactly how I'd spend that in my shop :)

How about hand tools? Do you incorporate them, or are u mainly concerned with power tools?

  • Author
How about hand tools? Do you incorporate them, or are u mainly concerned with power tools?
I would like to incorporate hand tool as well but I am mainly like a power tool man. I guess now that I think about it, My picture should be on the front cover of Marc's new book. I am a hybrid woodworker!

These are always fun! I recently added a bunch of tools, my budget was not 10K but it was pretty sizeable and boy did it go quick. The Sawstop, planer and jointer can eat up 70% of your budget right off the bat. Do you have dust collection? I did not factor that into my initial budget and ended up adding it later because I could not do with out it. You said in your post title that you have 10-15K, 15K will put you in the range for some nice tools, lifetime tools. 10K there will have to be sacrafices, as crazy as that sounds. I will post again with tools, no time now. This is pretty cool!  Congrats on the new shop!

I am currently looking at replacing and upgrading as well, my thoughts are tending to buy just one time so go great or don't go at all

Already have the domino, if you can get it you will not regret it.

Bandsaw: I have been eying the Laguna 14 SUV 13.5 in resaw if memory serves and loaded with other nice features (at the same time several of the grizzly units are tempting with the price) - this is an item that you technically could build yourself (woodgears.co) so if you have to hold back on an item this is where I would

Dust collector: Clearview cyclone, read bill pentz and it seems to be the best deal

Tablesaw: power and safety (not encouraging complacency) sawstop 3 hp table saw (I personally wouldn't add money to increase rip capacity as I would replace the fence with my incra fence)

Jointer and planer: I have been struggling with this one myself, if money were no problem: powermatic. I currently am running the Dewalt lunchbox 13" and a 6" general jointer.

Hand planes: lee valley or lie-Nielson

Spindle sander: jet

Drum sander: build your own (wood gears) or jet

Miter saw: Festool whenever an option

Lathe (I inherited a south bend lathe that I will never replace, so I have not researched)

I would recommend the jet clamps over besey but that is just personal I like the release mechanism more on the jet parallel clamps

Drill press: you can outfit a standard large drill press for woodworking needs, I would go with grizzly or craftsman here

Sanders: unless there is one with significant dust collection capabilities I do not see reason to spend a lot on big brands here

15K BUDGET

  • Table saw (Thinking Sawstop 3HP with 30" OR 50" rip?) 36" 3 HP, if you got the the 1.75 and have 220 available you will have wished you went with the 3 HP saw.  Don't forget about accessories, these can add up quick too. If you have the budget and you want to do it big, then get some high quality blades.  ($3400 ish depending on upgrades)
  •   Infinity 2-pc dadonator + Super General ($300)
  •     Infinity 24T rip blade ($50)
  •    MicroJig Accessories ($100)
  •    Incra Miter Gauge 1000HD ($160, sometimes on sale for less)
  •  
  • Jointer- I like the combo machines (wish list) If it were me I would go with the Hammer A3-31 J/P Combo. (12") with spiral cutter ($3800 ish)
  •  
  • Planer
  •  
  • Miter saw (kapex?)
  • I would skip the miter saw, Kapex is cool but $1350 is a good chunk of  your tool budget
  • Band saw (maybe two?) Laguna 14 SUV ($1600)
  •  
  • Disc and belt sander
  •  
  • Oscillating spindle sander
  •  
  • Lathe- Skip for now
  •  
  • Full size drill press- Skip
  •  
  • Domino (maybe but there would be other Festool's first) 
  • TS55/75 
  • CT26
  • Domino
  •  Total for all Festools ($2000) 
  • Cyclone dust collector- Clear Vue not sure which one plus ducting ($2000 best guess)
  •  
  • Collection of hand planes/hand tools ($1200-$1300)
  • LN No 62
  • Block plane- rabbet
  • router plane
  • Shoulder Plane
  • 2 Chisels (1/2" and 1/4" LV or LN)
  • Dovetail Saw
  • Sharpening

This might be a bit over 15K but as you can see it goes very quickly

 

10K Budget

- I would go with Grizzly 15" Planer and 8" Jointer

- Skip the Domino

- Just get LN No.62 and Block Plane, 1 chisel and Veritas DT saw, Sharpening

- There are probably a couple other areas you can cut

 

I would think about one or two tools that are dead set on going with. You seem pretty set on Sawstop 3HP saw. I would make that your priority and any accessories that go with it. Then think about your next couple tools and add those. At this point you will know what you have left to spend and then prioritize. It's crazy how quickly it starts to add up. When you think about a 15K budget, it seems like you should be able to get exactly what you want until you start adding it up. 

 

Very interested to see how this plays out. Good Luck

 

I won't do the whole list because I just don't know your situation and project load.  But here are few things I would prioritize based on your list.  

 

DOMINO:  If you don't go with the Domino, I would consider looking into a Mortiser.  Shopfox (Sub of Grizzly) makes a 3/4 hp model that has been reviewed and awarded many times by very reputable sources (FWW etc).  I have one and love it.  I have never used a floor standing Mortiser, so I can't say the benefit of making that jump, though I build primarily tables for commission work these days, and I have never been limited by the bench model.  

 

BANDSAW: If you don't already have a band saw, this needs to be near the top of the list.  You could easily blow 25+% of your budget here.  Figure out what you really want.  I favor Grizzly tools, because of excellent history with them, and what I perceive to be good "value".  I actually just ordered the 14"BS with riser block yesterday from them.  With a more flexible budget (and 220 elec) I probably would have gone with their 19" (5hp?) model with all the bell and whistles.  Check out their videos at grizzly.com, they have comparisons walking you through each model and what the extra benefits are.  Band saws are like jointer/planers in the fact that they quickly pay for themselves by reducing the cost of milling at the lumber yard, not to mention all the normal shop uses besides milling that they open up to you.  I think you'd be hard pressed to find some one with a quality BS that doesn't use it in nearly every project.  It may be only second to the TS for most used tools in many (if not most) shops.  

==> $10k - 15k tool budget

 

You've posed a very interesting question.  The $10K - $15K budget is going to give this thread some legs...  If you had $30K, then it would be easy.  But at $10K - $15K, we'll have to make some trade-offs...

 

 

==> Let me first start by saying I have a full hobby shop right now

 

Please list your current tools... Any solution will be some mix of new and old...

 

 

==> I use a lot of sheet goods but am wanting to focus more on milling from rough cut lumber and focus on solid wood construction.

 

Do you have a list of your near-term and mid-term projects?  The size/type of projects is going to be a factor...

 

 

==>  I am a hybrid woodworker!

 

How much of a hybrid woodworker?  For instance, if you want to go down the path of more hand work, will you start making mortise/tenon with hand tools?  If so, then you don't need a mortiser... etc.

 

 

==> focus more on milling from rough cut lumber

 

What are your starting materials?  Do you see yourself really getting rough lumber or are you talking S2S?  Getting rough lumber and milling it yourself would place more emphasis of jointer/planer... Maybe you'll decide to source S2S and scale-back the J/P.

 

Finishing: any interest in spray kit?

I would not be thinking about furnishing a complete shop with that small of a budget. I would concentrate on the stationary tools and throw every dime at them. The small stuff can come later. Its easier to save a few hundred bucks for that small power tool or hand plane than it is the few grand for the machine. 

My Budget for my shop was 51 I spent 34 of that on stationary equipment. I would guess if you stay away from saw stop and head over to grizzly you could get a nice cabinet saw, 15 or 20" planer, 8" jointer, decent bandsaw, drill press, dust collector,drum sander and 3hp shaper while being close to your budget. 10K budget. Now if you can squeeze out 15 then you can easily throw in plenty of extras that will put the icing on the cake. Below is just an example of what I'm talking about.

 
To Buy Now Price: Quantity: g1023rlx.jpgG1023RLX - 10" 3 HP 220V Cabinet Left-Tilting Table Saw
Item added on Wednesday August 28, 2013
Price:  $1,495.00 Freight:  $150.00 Total:  $1,645.00 g0453.jpgG0453 - 15" Planer
Item added on Wednesday August 28, 2013
Price:  $1,050.00 Freight:  $150.00 Total:  $1,200.00 g0490.jpgG0490 - 8" Jointer with Parallelogram Beds
Item added on Wednesday August 28, 2013
Price:  $925.00 Freight:  $150.00 Total:  $1,075.00 g1066r.jpgG1066R - 24" Drum Sander
Item added on Wednesday August 28, 2013
Price:  $1,595.00 Freight:  $99.00 Total:  $1,694.00 g0513x2.jpgG0513X2 - 17" Bandsaw 2HP w/Cast Iron Trunnion
Item added on Wednesday August 28, 2013
Price:  $1,050.00 Freight:  $99.00 Total:  $1,149.00 g7948.jpgG7948 - 12 Speed 20" Floor Drill Press
Item added on Wednesday August 28, 2013
Price:  $655.00 Freight:  $99.00 Total:  $754.00 g0441.jpgG0441 - 3 HP Cyclone Dust Collector
Item added on Wednesday August 28, 2013
Price:  $1,395.00 Freight:  $99.00 Total:  $1,494.00 g1026.jpgG1026 - 3 HP Shaper
Item added on Wednesday August 28, 2013
Price:  $1,095.00 Freight:  $99.00 Total:  $1,194.00 Add coupon or pricing code:
 

Do you need liftgate service?  What's this?btn_addliftgate_c.gif
Merchandise:  $9,260.00 Freight:  $945.00 **Subtotal:  $10,205.00 btn_continueshopping.en.gif

 

With that budget, I would have to agree with Grizzly. Or you could wander the used market for a few older machines. If a table saw is something you are not dying for right now, wait around a bit for a good deal to come up. Might be worth your time.

 

I don't want to sound like an advertising slogan for Grizzly, but I have the G0715P table saw and G0656P jointer. All I will say is I got what I paid for, and it suits my work.

I'd start with a hard look at what tools you have now that are UNDER performing (for you). Or what tools don't you have that would have really been a plus on your last couple of projects. I know, not as much fun as someother post but only you can decide what really needs upgraded or added to you shop.

I'd start with a hard look at what tools you have now that are UNDER performing (for you). Or what tools don't you have that would have really been a plus on your last couple of projects. I know, not as much fun as someother post but only you can decide what really needs upgraded or added to you shop.

Very true. A good example of this situation would be the drill press. How well does your bench top unit serve you right now? Would you really notice a big difference upgrading to a floor standing model for $750 or more?

 

It would be better to get half of the tools you need of better quality than all of the tools you want in lesser quality.

Before you place that order with Grizzly, I'd take a step back and make a list of the projects you want to do first.

 

Do you want to make a bunch of cabinets out of plywood? Then a table saw will be at the top of the list.

 

If you want to make chairs from solid wood, a table saw will be much less valuable, and I would argue that a high quality bandsaw will be more essential, and you could possibly skip the table saw altogether.

 

If you want to make guitars, then your tool requirements will change again.

 

So make a list of the projects you want to make, and buy accordingly.

Before you place that order with Grizzly, I'd take a step back and make a list of the projects you want to do first.

 

Do you want to make a bunch of cabinets out of plywood? Then a table saw will be at the top of the list.

 

If you want to make chairs from solid wood, a table saw will be much less valuable, and I would argue that a high quality bandsaw will be more essential, and you could possibly skip the table saw altogether.

 

If you want to make guitars, then your tool requirements will change again.

 

So make a list of the projects you want to make, and buy accordingly.

 

+1 to all of the above.  The only item I would put at the top of the list, at least based on what I understand you have is GOOD dust collection.  I think at this point something like the clearvue or equivalent is pretty much a 'lifetime buy', and if you plan on spending long hours in the shop, protecting your lungs (not to mention keeping things clean) is a high priority..  I know for me, I've got tools I'd like to replace (crappy TS, underpowered BS, only a 6' jointer), but I'm saving up for my clearvue next..

 

Once you have that squared away, then I would look at which tools feel like they annoy you, or are holding you back..

 

My 2 cents, your mileage (kilometerage) may vary :)

 

Happy sawing...

  • Popular Post

I have to disagree about the last couple theories posted. You buy a dust collector to match your machines and anticipated future purchases along with the space that the shop is located. A table saw is just as much for chairs as the bandsaw. If your going to do loads of sheet goods that has nothing to do with a table saw but more about what your comfortable with. Personally I cut sheet goods all day on a regular table saw but many would not hear of it thinking its to unsafe thus making some sort of slider or track saw a needed option. I can understand buying specific tools based on what a guy does but really how many guys only do one thing. Its nice to have a nice selection of standardized stationary equipment that you can count on for any project that may come. 

Lastly you would not believe how nice it is to have everything shipped right to your door in a truck all the locations pre planed with dust collection and electrical in place.

 

Personally since its not my money :) I say get on the horn and place that monster tool order before you change your mind. :) Besides if there is a wife in the picture you need to move quick before she changes her mind. 

  • Author

I am reading all of your replies on my phone and absolutely love and appreciate everyone of them. When I can get to my computer I will answer some of the questions. How is grizzlies quality compared to other tools? What Particle Board has added to the cart really would revamp and work wonderfully in my price range but also don't want to settle just to get all the tools at once. I don't know how grizzly's quality is. I have not seen much of their equipment in person. Again, I will reply again when I can get to a computer.

Grizzly's quality controls have gone way up in the last 5-10 years, and to be fair, they weren't bad before.  They have long been considered to be on par with JET, and Delta.  Model by model differences apply, but overall, they are a higher end importer (I realize that is an oxi-moron to some, by importer I mean a US company manufacturing overseas to sell in US).  They are extremely easy to work with on customer support if you need anything. 

 

One thing to add, is don't be afraid to try and negotiate pricing.  An order of this size should at the very least get you a small break on freight or some free accessories.  If you don't have a Grizzly discount code, it may benefit you to ask them for one.  They send out 5%-10% discounts on their catalogs when they send them (or they did in the past).  So you may be able to get them to issue you one over the phone instead of waiting for a catalog to show up.

 

Get your list of desired tools and call a few places. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.