tdh36185 Posted September 7, 2013 Report Posted September 7, 2013 I was wondering if anyone knew of an adapter to use router bits on a shaper table. It would be nice to use the shaper to cut sliding dovetails or even t tracks. Quote
TRBaker Posted September 7, 2013 Report Posted September 7, 2013 One of the benefits of having a shaper is that you can also use it with router bits. Anybody that sells shapers will probably carry the needed collets. Quote
dwacker Posted September 7, 2013 Report Posted September 7, 2013 Yes and no. Small diameter bits don't work we'll on a shaper. Your shaper manufacturer should have a spindle to fit your machine they are not universal. 1 Quote
T-astragal Posted September 7, 2013 Report Posted September 7, 2013 Yep lots of small diameter cutters need more rpm. They work though. I've run one on a drill press and a horizontal mortiser before. I also run a 10" saw blade on my shaper. I had it bored out to 1 1/4". Steve Quote
Slick218 Posted September 8, 2013 Report Posted September 8, 2013 Saw blades on a shaper are great for making grooves. If set up correctly, you can minimize the chip out on the shoulder of the groove. Insert tooling is pricy to say the least and this is a great alternative Quote
pghmyn Posted September 8, 2013 Report Posted September 8, 2013 What about a biscuit cutter blade on the shaper for grooves, smaller diameter, so it's not as massive as a 10" blade spinning up there. And the grove is a bit thicker than a regular table saw blade. Just an idea, since we're talking about saw blades Quote
dwacker Posted September 9, 2013 Report Posted September 9, 2013 What about a biscuit cutter blade on the shaper for grooves, smaller diameter, so it's not as massive as a 10" blade spinning up there. And the grove is a bit thicker than a regular table saw blade. Just an idea, since we're talking about saw blades I would probably suggest just using the right tool for the job and keep your extremities and maybe live a little longer. Osha banned the use of circular saw blades not designed for shaper use decades ago mainly due to to many deaths in the work place. You can however buy blades that are designed for shapers. Amanna makes a decent little 3/4" bore 4" stacked dado set or sells the individual blades in different thicknesses relatively cheap about $50. Royce Ayr sells a complete line up of blades made just for shapers. There are plenty of affordable groovers on the market with scoring cutters that out perform circular blades hands down. Shapers are nice but they do have their limitations. Quote
G S Haydon Posted September 9, 2013 Report Posted September 9, 2013 Like has already been said a proprietary adapter may exist for your shaper. The next hurdle is then speed, your shaper will need a high speed setting for a good finish. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.