Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Proud new owner of a 14" BS

Featured Replies

I picked up a masterforce (menards) bandsaw tonight, stepping up from a 10" delta. I've had good luck with the masterforce tools before, this things got a really beefy frame, the manual says it weighs 205 lbs, felt like twice that unloading it out of the back of my truck by myself! So, after some errands tomorrow I'm going to build a stand for it and get it all squared up. So any advice on resawing? It will take up to a 3/4" blade so that will be my next purchase, but what tooth count for resawing hardwood?

Congrats on your new purchase.  I would recommend a 1/2" Woodslicer from Highland Hardware.  I had a 3/4" Timberwolf 3TPI on my 14" and the 1/2" Woodslicer beats it hands down. I didn't really believe all the raves about it until I actually purchased one and used it.

  • Author

Thanks guys! Craig, I'll check that out right now. I Appreciate you pointing me in the right direction!

I'm interested in hearing about the dust collection on your new saw.  My 14" bandsaw dust collection sucks and not in a good way.

  • Author

From looking at it Pete, I'm not sure mine will be much better, it's only a

2 1/2" port, so I don't expect a whole lot, but I will let you know.

Dust collection on bandsaws is notoriously bad.

 

I have the Masterforce 10" contractor table saw.  It's essentially the same saw as the Rigid and Craftsman with different paint on it.  It needed next to no adjustment out of the box other than what comes standard with assembly and I'm really happy with it.  Dust collection is above par, it holds square and is generally a pretty competent saw.  I really like the design on its mobility as I need to move tools around in my shop alot.

 

I'm sure you'll be happy with your choice.  TPI is more critical for resawing than blade with although I find the wider the blade the more control you have over getting a straight cut.  Contrary to intuitive thought, a lower TPI is better than a higher one.  It keeps the gullets from clogging up with sawdust when resawing.

  • Author

Thanks byrdie, I had to do a lot of adjusting on my bs, but mine was a floor model, and I don't think the guys at menards read the directions very well when they slapped her together! I had to take the table, trunnions, and blade guides off and adjust everything. Dust collection was actually pretty good, I cut some cherry without then hooked up the shop vac and cut some pine and didn't notice any dust getting out, there was a little inside, but the dust port seemed to get a lot of it.

I'm definitely going to have to get a different blade for resawing, it takes enough pressure that I start pushing the blade out of square, but the factory blade is a general cut 1/2" blade, maybe 8-10 tpi.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.