Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Having a heck of a time with this smoother

Featured Replies

I was getting some hand tool time in after dinner and I am having a horrible time trying to get an old Stanley #4 set up.

I am starting to think it has the wrong iron on it (2x7 3/8) as the iron extends back far enough that it pushes down on the adjustment lever.

I find that adjusting the position of the iron is pretty difficult. I have to set the frog most of the way forward to get the blade to protrude from the mouth at all (otherwise when I adjust the blade forward the blade pops off the adjuster dog).

Trying to plane anything just gets dust crammed into the tiny gap between the edge of the blade and the cap iron. In short, this plane almost took a short flight across my garage.

Any pointers before I eBay this thing?

The cap iron needs to be flattened so the leading edge of it fits tightly on the iron.  That's the only way to prevent shavings from getting caught in there.

  • Author

Tom - I can't see any light coming through between the cap iron and the blade.

I may have had the iron set too far back. It was about a mm back from the edge if the blade.

Graham - please don't go through the trouble of making a video for my sake.

Thanks gentlemen!

  • Author

Took a few moments to adjust the cap iron and I am still getting nothing,

I feel like the blade and iron are too wide for the mouth of the plane, I can barely get them to protrude before they catch on the sides of the mouth.

Chuck,

 

Wind the frog back so it's only just in front of the casting creating close to the widest mouth opening possible and make sure it sits reasonably square.

 

Arrange cap iron and blade thus

 

935c.jpg

 

Too late on the vid, it's not great but I will post it tonight. 

http://youtu.be/GehVZyPviwI

 

Not great I will admit and I chose to use my cheap faithfull brand plane. I think GROZ would be it's US bro.

 

When my hand covers the shot (doh!) I'm moving the frog right back so its just in front of the casting. 

 

As it's a smoother cap iron should be set close. I do the screw up finger tight and then ease it forward with light taps of the screwdriver.

 

Cap iron should fit like the drawing in the earlier post.

 

Hope that helps

This probably isn't what you want right this second, but I just thought I mention that I watched Chris Schwarz's "Super-Tune Your Hand Plane" before I tuned up my #4 and found it to be really helpful.

 

He basically takes you from a rusty ebay find to a fully "super-tuned" hand plane. It's both comprehensive and simple and straightforward. 

 

You can buy the DVD or watch it on Popular Woodworking's Shopclass site for a fee, which is what I did.

 

Preview:

It's really very simple.  The sole has to be flat, the throat the right size, the chip breaker and cap iron has to fit  tightly with no room for anything, and the iron has to be sharp-the sharper the better.  I have a toolbox with a "Smooth" label on it.  Inside are 2 No.3s, a No.4 -those three Stanleys around a hundred years old, a Record 4-1/2 from the '60s, and a Primus Reformed smoother is the newest one.  Any one of them will take a shaving less than a half of a thousandth of an inch with the stock irons.  I got it down to .0002 with the Record. They all fit the simple rules required.  It took maybe a half hour each to tune up the metal ones.

 

 

For some reason my computer won't view movies in Graham's format.  I know more about tuning a plane than about computers.

Graham,

Those shavings........

Thanks Sam (I hope, unless its "...........are s*&t......... :D), Eastern White Pine + Sharp Plane = Easy Shavings even from cheap tools. I should do a "Cosman Video"

 

For some reason my computer won't view movies in Graham's format.  I know more about tuning a plane than about computers.

 

Your not missing much Tom :). They are only from YouTube so should be just downloading an update if you feel the need to see me in action.

This probably isn't what you want right this second, but I just thought I mention that I watched Chris Schwarz's "Super-Tune Your Hand Plane" before I tuned up my #4 and found it to be really helpful.

 

He basically takes you from a rusty ebay find to a fully "super-tuned" hand plane. It's both comprehensive and simple and straightforward. 

 

You can buy the DVD or watch it on Popular Woodworking's Shopclass site for a fee, which is what I did.

 

Preview:

How far does he go with this Chris? Does he refine the frog seating, polish the front of the cap iron/chip breaker etc? 

  • Author

Thanks gentlemen!

 

My old #4 is now making shavings.

 

I reflattened and resharpened the iron, flattened the cap iron, set the frog about halfway up towards the mouth, and then set the cap iron about a milimeter back from the edge of the blade.

 

With a little finessing I was able to get some decent full length shavings on my test board.

 

Now I just need to work on being able to actually keep the edge of the board square to the face...

post-13757-0-27987500-1381881957_thumb.j

How far does he go with this Chris? Does he refine the frog seating, polish the front of the cap iron/chip breaker etc? 

 

Yes, he covers flattening/filing the frog and frog bed flat as well as making sure the chip breaker is seated against the blade without any light leaks. It's definitely focused on getting a user up and running and not making it look perfect and brand new but I found it comprehensive and helpful as a beginner who'd never set up a used plane before.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.