Recommended Posts

Posted

Picked up an old 14" bandsaw and experimenting with re-sawing.

What speed is best. I'm trying wider boards about 8" to 10". Mostly reclaimed barn beams of what appears to be heart pine.

Is faster or slower better or does it even matter.

Thanks

Posted

I'll assume you're referring to how fast you feed the wood into the blade.

As long as you don't feed the wood in before it cuts, meaning bending the blade, and you stay on your line, you're ok. No burning to worry about like a table saw.

Posted

Sorry,should have been more specific. Was talking about blade speed.

Since the saw has 4 speeds wasn't sure if blade speed was different for different tasks.

Sort of like varying the speed of a router depending upon the task.

Posted

It may not be a wood bandsaw. It's probably ok, but not ideal. Usually the metal ones have speeds for different metals.

Just use the fastest speed, and experiment. Depending on how fast your saw is, you may not be able to feed the wood as quickly as you could on a saw built for wood.

There was a letter in finewoodworking from the owner of Grizzly regarding this. I can't remember what issue it was in.

Posted
The typical or average type of wood cutting band saw runs between 800-5500 sfpm. Use fast speeds when cutting wood
or when cutting aluminum.  Slower speed is suitable when cutting some non-ferrous metals like brass , copper and perhaps 
some very mild, thin steel.  
 
Here's an equation to calculate band saw blade speed ( Surface Feet Per Minute) 
 
Motor RPM X Motor pulley diameter / Driven pulley diameter X Bandsaw wheel diameter x 3.1416 / 12 = S.F.P.M.
 
Recommended speeds (approximate) for various size saws:
12" = 2800 FPM, 14" = 3300 FPM, 16" = 3800 FPM, 18" and above = 4000 FPM.
 
When you cut wood, it is recommended to run your saw in a 2000-3000 sfpm speed rate. 
In cutting metals, set the blade from 100 sfpm for harder materials and 300sfpm for soft materials. 
 
Talking about expirement, try to make test by resawing at around 1500sfpm and around 3000sfpm . Then,make a 
comparison.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined