Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New shop build and question of weight

Featured Replies

Hi everyone first time here been loving the pod cast so i figured lets turn here. quick run down...

 

Been wanting to build a shop for years and due to one thing or another it always got put off. Well I said the hell with it and sold my record collection and guitar pick collection and now have the money to buy some of the bigger machinery. So then while shopping at work I have a stroke ...I know the hold worlds against me hahaha. but the reason I mention is this, I can not lift a huge amount any more but I have 2 other strong guys that can help.... BUT my questions is this..

 

My shop is going into a walk out ranch over grass about 30 -40 feet how is the best way or how do I get the machinery back there ... wheels , ? plywood ramps.... I open to suggestions.

 

and what is the best order to buy bigger items?

 

thanks

 

Assuming you purchase new machins, they often come disassembled anyway, so individual parts shouldn't be too hard to move with a dolly and some plywood to help roll over the grass. Your friends might even be able to just carry the parts in. If you have to move a pre-assembled machine, it certainly helps to create a smooth surface to roll a dolly or pallet jack on. Might be worth investing in enough lumber to make a temporary boardwalk that can support more weight and be more stable than just dropping plywood on the grass.

My personal choice, if starting from scratch, would be tablesaw, jointer, and thickness planer. Unless you really enjoy the workout of smoothing boards by hand, or have an affordable source for pre-surfaced stock.

Good luck, and enjoy the new shop!

Hey Big Jim. Welcome to the forum. I agree with Highlander and would add a compound miter saw to the "buy" list. Oh, and two strong backs with one good hand-truck can move some amazingly heavy stuff. Just make sure that when you lay out your plywood, you lap your sheets so that the wheels roll over the lap and not into the edge of the next sheet. It just makes life a little easier. Praying you recover fully from your stroke.

+1 with the above. I guess I would ask what projects you will be getting into. If your disability is temporary and you will be able to lift heavy loads again, go with a fully equipped shop. You will be able to build anything you want and be able to move raw materials and finished projects around. If you think that some infirmity may linger, look at the lighter side of woodworking (possibly harder work, more exacting but lighter lifting) like scrollwork, intarsia, some wood carving, etc.

 

Don't forget your hand tools too!

 

Welcome and good luck.

  • Author

I am going to go with a full shop I already have quite a few tools and many I just am selling to upgrade. The big hold off right now is seeing where the stroke goes . Not going to get near anything with a motorized blade at this point.  The main issue right now is balance, but not far behind are the headaches, being tired very easy, and some things are fuzzy. Cause 40 is way to young for this

Hey Big Jim welcome to the forum. Like the others I also wish you a speedy recovery. I can recommend a book called "Setting Up Shop" by Sandor Nagyszalanczy that is a mine of good information. Amazon sell it and it is a Taunton Press book.

You may find it interesting to read and you can plan while you recover.

40! Wo... Big J, were you living like a rock star or what! Damn, that is young for a heart attack. I agree with Terry, while your recuperating keep the mind sharp and build your enthusiasm by armchair building and reading. I do it too when I can't get any shop time.

  • Author

40! Wo... Big J, were you living like a rock star or what! Damn, that is young for a heart attack. I agree with Terry, while your recuperating keep the mind sharp and build your enthusiasm by armchair building and reading. I do it too when I can't get any shop time.

I was a rock star ;) but the true definition of irony I have been straightedge (drug/alchol smoke free) since 1988 and I dropped 80 lbs over 2 years to get in better shape and I have already had Cancer and ribomyalosis. When this hit I was like "really seriously now this, i got the triple crown" hahahahahha

I was a rock star ;) but the true definition of irony I have been straightedge (drug/alchol smoke free) since 1988 and I dropped 80 lbs over 2 years to get in better shape and I have already had Cancer and ribomyalosis. When this hit I was like "really seriously now this, i got the triple crown" hahahahahha

Damn, you must have been on borrowed time!! Whatever your doing has preserved you keep doing it! And for God's sake man... go play the lotto ;-)

Welcome Big Jim.

Don't know if you are in the same boat.

 

But out here most of the company's from which you can buy big machines, will deliver and set them up for you.

 

Acme Tool in Des Moines will do that with any large tool you buy.

You may find the same sort of service at one of the dealers in your neck of the woods.
 

  • Author

Welcome Big Jim.

Don't know if you are in the same boat.

 

But out here most of the company's from which you can buy big machines, will deliver and set them up for you.

 

Acme Tool in Des Moines will do that with any large tool you buy.

You may find the same sort of service at one of the dealers in your neck of the woods.

 

never heard of that let me look into that

  • Author

Damn, you must have been on borrowed time!! Whatever your doing has preserved you keep doing it! And for God's sake man... go play the lotto ;-)

you think i would of got a set of steak knives by now, or at least a christmas card from the hospital

My situation may be different, but my grass does OK with occasional vehicle driven on it.  I backed a rental truck with a lift gate into position when I brought home my 12" jointer that weighs in at 1000lbs.  When I moved stuff from my garage to the shop when I originally opened the shop to equipment, I used two 3/4" plywood sheets and just wheeled everything over.  Lifting them was a bugger, but myself and a buddy managed it all.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.