Tony Wilkins Posted October 23, 2013 Report Posted October 23, 2013 I got the David Charlesworth Planing video on Monday and watched it a couple of times already. This is the one that is the second of a four part series of DVD's (the first is the plane sharpening DVD I haven't gotten yet). I'm sorting through the information in my head. Here's what I've gotten out of it so far: 1. He prefers 'longer' planes such as 5's and 5 1/2's. 2. Instead of planing 'flat' - which he says does not exist in the real world - he uses stop cuts to plane in a slight hollow. He does this in every dimension of the 'datum surfaces' - along the edge, across the board, and the length of the face. He sets up his 'long' planes as "super smoothers". 3. He takes very small shavings, for example 1 thou for normal planing, 2 thou for beginners, and up to 4 thou to take down a lot of material. This varies from Schwarz that talks about taking 1/16 to 1/8 inch shavings with the fore plane. I'm guessing that this is because Schwarz is talking about rough milling whereas Charlesworth is talking about finishing off machine milled lumber. I'm sure there's some I missed. I'm not guaranteeing I got it all right either lol. So has anyone else watched the video? What do you think of what he demonstrates in the video. Quote
mking1 Posted October 23, 2013 Report Posted October 23, 2013 The David Charlesworth DVD series is an excellent to start learning about using hand planes. He is very knowledgeable and has a lot to offer. But, as you develop your skills and perhaps see other DVD on the same subject by other very knowledgeable authors you will see that there is more than one way to skin that cat. I would recommend “HANDPLANE BASICS” by Chistopher Schwarz. This video will explain why there are some many different lengths and widths of hand planes and how to use them. Good luck. – Miles. Quote
Popular Post PaulMarcel Posted October 24, 2013 Popular Post Report Posted October 24, 2013 I agree with Miles; the Schwarz DVDs offer a lot of insight so you can make a good choice at any of the stages of working the wood; "Coarse-Medium-Fine" comes to mind. I have the Charlesworth DVDs. I've seen the first 15 minutes of all of them a couple times. Then wake up with the menu playing. 3 Quote
nateswoodworks Posted October 24, 2013 Report Posted October 24, 2013 I have used hand planes for years but when I joined http://robcosman.memberlodge.com it helped me in areas I didn't know needed help. In my opinion the best thing you can do it go plane some wood keeping in mind what you have learned, watch it again and repeat. The basics that get you going but it's the little things that really make the difference. The biggest thing is sharpness, which is a lot sharper than one may think, once you have that everything else comes quicker. Quote
mking1 Posted October 25, 2013 Report Posted October 25, 2013 I agree with Miles; the Schwarz DVDs offer a lot of insight so you can make a good choice at any of the stages of working the wood; "Coarse-Medium-Fine" comes to mind. I have the Charlesworth DVDs. I've seen the first 15 minutes of all of them a couple times. Then wake up with the menu playing. And I thought that I was the only one to take an afternoon nap with Charles. --Miles 1 Quote
Trip Posted October 25, 2013 Report Posted October 25, 2013 ==> I've seen the first 15 minutes of all of them a couple times. Then wake up with the menu playing. he's got that hypnotic voice thing going -- he would make a awesome hypnotist, but a really poor sports broadcaster -- well, maybe golf... if that's a sport... sorry... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.