Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Adjusting to my new Lie Nielsen LA Jack

Featured Replies

Just got my Lie Nielsen LA Jack this afternoon.  Got it out of the box like a kid on Christmas morning.  I'm so use to the Veritas planes; it didn't feel bad - just different (not like the LN #5 I had months ago).

 

My main adjustment was in shooting with it.  I didn't get the hotdog.  I set it up and started using it.  At first I used it with the grip as I had read earlier was correct - fingers under the 'frog' (pressing the base against the rail) and thumb on top (pressing down).  The chamfered edge of the blade pressed into my hand and made it uncomfortable.  Then I tried how I thought I'd use it if I had a hot dog - gripping the top.  This way my hand cramped quickly.  So what is the correct way to hold the LA Jack for shooting?

 

Any other tips to get the most out of this plane?

When shooting with it, I hold my hand on the top (which is the side of the plane). I probably don't do enough shooting for it to be uncomfortable, but I agree if you have alot of shooting, there may be a better alternative.

 

As for getting more out of it, play around with the adjustments. Adjust the depth of cut and the mouth and see what different shavings you can get out of it. I made these shavings in hard maple with one blade angle. I think it was something like 35 degrees. 

 

1239364_10201948395899683_341920113_n.jp

Hi Tony

 

Two things:

 

Firstly, add a side fence (I called it a "running fence") to the runway of your shooting board. This will be the single biggest upgrade you can make! 

 

RunningFencefortheShootingBoard_html_m53

 

I wrote this article some time back, modelling it on the Stanley #52 I have ...

 

http://www.inthewoodshop.com/ShopMadeTools/RunningFencefortheShootingBoard.html

 

Secondly, a hotdog is unnecessary if you grip the plane correctly. Here it is with the LV LA Jack ..

 

ShootingPlanesCompared_html_309f013.jpg

 

There is a description near the end of this article: http://www.inthewoodshop.com/Furniture/ShootingPlanesCompared.html

 

Adding a hotdog handle is likely to be better for you (with reduced hand strength). Here is the set up with one of the hotdogs I made ..

 

RunningFencefortheShootingBoard_html_27c

 

Regards from Perth

 

Derek

  • Author

Thanks for the info Derek.  I had planned to add that side piece (running fence) to the shooting board.  Your article was one of the places I learned the grip for shooting.  That grip (BTW) worked fine with the Veritas BU Jointer.

 

I'll continue to play with it and see how it goes.

When I used my buddy's LN LA Jack (no hotdog) I found the if  gripped it the same way as the my LV it worked well. The LV has that thumb indent and a lever cap that is designed to sorta make you hold it right. With the LN those rode maps aren't there but the same grip works.  Palm behind side wing, thumb on side, couple fingers wrapped around the underside of the lever cap.  

 

Sounds like that's what you were doing, so you may just need a bit more practice.

 

Also, you were shooting with your LV BU jointer?  The sides of that plane aren't squared or really machined...at all, how'd you make that work?

  • Author

When I used my buddy's LN LA Jack (no hotdog) I found the if  gripped it the same way as the my LV it worked well. The LV has that thumb indent and a lever cap that is designed to sorta make you hold it right. With the LN those rode maps aren't there but the same grip works.  Palm behind side wing, thumb on side, couple fingers wrapped around the underside of the lever cap.  

 

Sounds like that's what you were doing, so you may just need a bit more practice.

 

Also, you were shooting with your LV BU jointer?  The sides of that plane aren't squared or really machined...at all, how'd you make that work?

 

I'll try different positions with my hand.  I notice you said lever cap; I've been putting my fingers underneath the blade.

 

As far as shooting with the BU Jointer, I was playing around with it - doing it with a scrap end.  Didn't realize it wasn't squared to the side.

 

I haven't tried the LN on anything but end grain - that'll be on the agenda today.

Naughty, naughty Tony ... you did not read what I wrote ...

 

"Downforce is applied by the thumb directly into the dimpled fingerhole. Sideforce is applied by the four fingertips pushing from under the levercap."

 

:)

 

Regards from Perth

 

Derek

  • Author

The word lever cap must be stored in part of my brain with the lesions.  Starting on a table top soon so I'll give it a try with those.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.