Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Sanding sealer. Is it necessary

Featured Replies

Ive not ventured into doing much more than clear poly from a rattle can on my projects, but I have a project in mind that I will be using a spray gun to finish, and I see a lot of talk of sanding sealer, but anytime I've used it, I didn't notice any benifit to it? So what exactly is the purpose of it? Sorry for the noob question, I'd like to expand my finishing techniques.

Many finishes are self-sealing, so they don't need a separate sealer.

 

Why would you want to use one anyway?   Sanding sealers are meant to sand more easily, sooner, than the top coat they go under.   If you sand a top coat too soon, you'll often see "pilling", as in a bunch of little pills or balls, on the sandpaper.  The pills are chunks of resin that is still too soft to fracture when rubbed, so it rubs into little balls.  As the resin rolls up, it doesn't leave a very good surface behind.  A good sanding sealer, or most properly cured top coats if you wait long enough, will fracture into dust as the abrasives pass over, leaving a far smoother surface.  Since sealed wood is easier to sand smooth at finer grits than raw wood,  the sealer helps create a really nice base for the top coats.

 

The properties that make a sanding sealer good also mean you want to apply only one or two thin and properly sanded coats before moving on.  Too thick of a sanding sealer layer can create a soft finish once the top coats are applied.  If you're using it properly, you're sanding most of the sealer off before moving on...

 

Another use for a shellac-based sanding sealer, like Zinnser Seal Coat, is as a barrier coat.  Since the shellac is not affected by many solvents, you can use it to separate a dye, pigment, or several layers, to prevent future layers from moving them around.  The shellac can also act as an "undo" for oil based pigment stains, as you can wipe the stain off with mineral spirits without disturbing the shellac.

It can also further help with moisture resistance if you use a vinyl sealer.

And no, it is not necessary, a good self-sealing finish will suffice.

I like it because brushing a thin coat of shellac between grits allows time for one's hands to stop tingling.   :)

  • Author

Good info guy. Looks like I've got some experimenting to do :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.