Recommended Posts

Posted

I just picked up a router table off Amazon with a blank plate.  I also bought a Skil 1817 router for it.  I removed the base plate from the router & have it centered to make my holes, but before I drill anything I want to make sure I'm doing this right.  Am I going to drill all the way through the base plate & counter sink the screws on top so that I'm looking at the screw heads while I'm using the table?

Posted

Woodhaven's site used to (and probably still does) have a PDF covering the entire process from soup-to-nuts.  They also have a library of full-size drilling templates...   If I get a few minutes, I'll look for it...  But you may get there first...

Posted

Actually the base makes a great template after I removed it.  There's concentric circles on the bottom of the plate to get it centered easy & lining up the distal lines with some of the manufacturing holes got me dead square to the front.  I just had it in mind that I was going to be screwing from the router side of the base into the base plate.  Since the mounting holes don't go all the way through (& with a little introspective thinking about how that might not be the best way to secure it in the first place) that's a no-go.  My only other thought was to drill all the way through the base plate of the table & mount that to the router as the original base did... which would involve counter sinking the base plate since I'd be looking at the tops of the screws when it was all in place.  Everything else was pretty simple, but I don't want to poke holes without someone confirming it first.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined