Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

amber shellac on ash

Featured Replies

So I put amber shellac on my ash and walnut table. In my test piece it wasn't nearly as yellow as it is now. I wanted to use the amber because it darkened the grain better than the blond. Is there anyway to tone down the yellow before I add the next finish. Also other than the top should I add general finished varnish?

Shellac is easy to remove, just wipe with a cloth soaked with alcohol and you will start to dissolve the old finish.  Once it lightens sufficiently, wait for it to dry then sand smooth with a high grit paper (like 300 or 400) to get rid of any mess or ripples you made with the rag.    From there you can put on more shellac to even it out, just use a more diluted cut or switch to a blonde shellac like Zinnser Seal Coat (which is lighter and heavily diluted).   If you plan on doing a varnish top coat,  make sure the shellac is dewaxed (zinnser amber has wax in it, seal coat does not).  wax can interfere varnish. 

 

I recently did something in walnut and cherry and I just wiped (with a tightly balled cloth) on 2 or 3 coats of really thin dewaxed amber shellac - probably about 50% diluted from what you would get in a can.  That was enough to warm it up without getting a real orange/yellow tone. 

Can't you mix the blond and the amber to lighten the color?

 

 

You could do that, the blond will mix in with the amber and maybe lighten it a little.  But even blonde has some color so at the end of the day you are adding color to color.  It is kind of like mixing yellow stain with orange paint.  You will still get orange :).  I don't have a color wheel handy but if you truly want to cancel out color you need to add the opposite color, not more of a lighter verson of the same color.   

 

If it were me I would start by getting rid of some of the old finish.  I never like to put on more finish than is necessary so I wouldn't want to keep adding blond until I get what I want.  Shellac is so easy to remove I think it is worth the effort. 

If you want just a hint of warmth with shellac and amber is a bit too much, you can add a dab of yellow transtint to Super Blonde...  

  • Author

So I'd put the blond on I don't mind the yellow actually it's just too much. Can I just lightely use alcohol but keep the stain that's already soaked into the grain(the reason I chose the amber in the first place) then add blind after lightening it up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.