Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

looking for some new shop setup suggestions please

Featured Replies

Hey everyone - long time lurker, first time poster.

 

We are moving into a new place in the next few months and the wife has said I should take 2 of the stalls in the 3 car garage to make a shop. Yes, she's a keeper. Up to this point, I've been working in my just-under 1 car garage shop with benchtop/portable tools, sharing the space with 2 motorcycles and other household necessities. This new space will be awesome.

 

I'm going to get some new tools (cabinet saw, real jointer, probably a bigger planer eventually to replace my old DeWalt, and a bandsaw). I plan to build some medium sized furniture (although a bed has made my honey-do list) for the most part.

 

My question is where to start with layout of ducting and electrical. I know Marc said in his shop build to plan for redundancy, but as this is my first go at a proper shop, I could use some advice on how to plan this redundancy. I know I have some of the usual noob mentality of "I gotta get it right first time", and am also aware that I won't, but I could use advice on planning for the "next" rearrangement.

 

-Dust collection is a big priority for me - thinking of going with a clear vue. That would require installing duct work. I'm not totally sure on tool layout, so should I just do my best and assume that in a year or two I'm likely going to tear down the ducts and rearrange? Because the CV unit will have it's own circuit, I'm thinking its position will be fairly fixed in time. Advice on where to locate it? I'm also concerned about being able to do a duct drop to the TS as it will likely be under where the garage door would be when open. Thoughts? (see next question)

 

-I'm planning on putting my TS in the middle, close to the garage door in case I need to do a long rip. Should I try to get an in-floor plug for the TS? I was thinking of putting a wood floor in (sleepers and insulation) over the slab, so I could potentially run the wire under the floor (I think - I'll have to ask the electrician). Once again, I don't know if this is going to be my saw's "final resting place". Or should my flexibility come from accepting having a cord running across the floor? I will likely cluster my TS and jointer +/- future planer 

 

-How do you guess where to put 20A circuits and where to put 30A ones? The electrical is fairly fixed once installed, but the tool positions aren't. Should I just pony up the dough and put everything on 30A circuits? I'm a 1-man shop, but some tools I've oogled over have suggested being on a 30A breaker for startup.

 

I think that's about it for now. I realize that it comes down to personal taste, work habits, etc, and that the evolution of the shop is constant, but I just need help to get that starting point on some of the more rigid things. I would hate to look at the garage 3 years from now and be like "dang, that was a stupid decision!"

 

Thanks everyone

 

-glen

Welcome to the forums!

 

There are just way too many variables to be able to accurately give advice.  So, here are some suggestions to help get you going in the right direction.

 

1.  Think about workflow.  From unloading the truck to breaking down large stock to milling to joinery to glue up to finish.

2.  Put stuff where you think it's going to live and do a couple small projects.  This will help you figure out where things live, especially your bigger stuff.  It will also help you figure out what's missing that you need to get in before making any final decisions.  Maybe you don't want to roll things around when you need them and can find a permanent home for it?

3.  Dust Collection.  After the above items are answered, that will tell you where your dust collector needs to live and where your ducting needs to run.

4.  Power - Again, suggest figuring all the above out before committing to placing that somewhere you don't want.  Short extension cords are a PITA but, they're moveable.  Will also answer your question about what circuits you'll need.

 

Once all that works for you, then work to setting some stuff in stone.  However, always plan for the future.  

 

Good luck with your new shop!  I hope you share some pictures of the journey along the way.

  • Author

Thanks for the reply, TIODS. I was looking at it from a "start with every tool and figure it out" point of view. I might be better off building the shop over a few months, adding bit by bit, and relying on my shop-vac for DC to start with, as oppose to going ahead with the CV right away. I will still need to have a general sense of where to put 220 outlets - i'm planning on hiring an electrician to do that, and the TS i'm getting will require 220, but hopefully that won't be too tough. I'm guessing it will all be surface mount, which will give great flexibility. In the meantime, I'll keep pouring over "shop tours".

 

Thanks

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.