ottacat Posted December 10, 2013 Report Posted December 10, 2013 This was a real hybrid type of project. It consists of solid walnut, walnut veneered plywood, veneer and MDF. Wood movement should be a non-issue and it should last a very long time. It is based from plans in FWW on a cabinet with different dimensions - I altered them to make it suitable for an end table instead of a small cabinet. I also changed the plain top into the quad-matched walnut burl. It also has some modern elements. The drawer is mounted on slides because I made it for my mom and it will go into her cottage which has fairly decent swings in humidity and I didn't want it to stick in the summer or be too loose in the fall. I did all the joinery using the Domino which included the carcass, the drawer and even how I assembled the top. I estimate I saved at least 8-10 hours and got a much more consistent result. I spent the time saved doing other new things such as the veneered top and the knife hinges. I also had mistakes and gotchas come along but I've learned from watching Marc that these sometimes just happen and are repairable. The drawer consisted of a frame with an attached face. When I glued the drawer up I missed checking it for square and thus when I mounted it on the slides it was a slight trapezoid. However I solved this by using a small shim when I planed the face and made it a slight wedge shape. When attached to the drawer it came out nice and flush. I also had an issue where the door had an unsightly and uneven gap at the top between it and the lower blade under the drawer. It was really bad - out about 3/16" of inch on one side and 1/16 on the other. So I used a tapering jig and cut a very small wedge - 1/16 on one side and 1/8 on the other over a 14" span and glued it to the underside of the blade. I then finessed it a bit with a handplane, sanded it and it fixed the issue. That made me happy as that gap really bothered me. Once done I was really happy with the result. Quote
ottacat Posted December 10, 2013 Author Report Posted December 10, 2013 The quad-matched top The completed table 1 Quote
TerryMcK Posted December 10, 2013 Report Posted December 10, 2013 Very nice work - the quad match is beautiful. Quote
TRBaker Posted December 11, 2013 Report Posted December 11, 2013 Wow! Great job, Ott. I know your mom's going to be showing it off to all her friends. Quote
lildesertwoodshop Posted December 11, 2013 Report Posted December 11, 2013 Very Nice ! The walnut Burl work is spot on !!! Quote
woodieboy Posted December 12, 2013 Report Posted December 12, 2013 Sweet looking walnut end table! You certainly outdid yourself today! Excellent work. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.