Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

are all drum sanders as slow as mine

Featured Replies

I bought a grizzly 18 inch open ended drumsander its been five years ago after setting it up figuring out the paper install then trying to use it as soon as that thing encounters any differnce in thickness the motor bogs and blows the breaker on the machine and I mean even small peices of wood I've sent it back to grizzly and they say that its fine I guess 'those things are designed to take such a small amount of stock you'd have to have so much time designated for sanding like months to sand one panel is it me or my machine

  • Author

I"ve had it in the corner for the past five years since I"ve deemed it useless I recently called the tech department at grizzly and thats what they sugggested I've moved to new shop  now so I'll drag it back out and try it again straight off my new elec panel if that doesnt work i"m thinking of swappin out its exsisting 1 and a half horse motor for a two horse

...those things are designed to take such a small amount of stock

 

You got it...those things are designed to take small amounts of stock per pass.  They're not designed to do the work of a planer...that's what planers are for.  You should only need to take a couple or few very light passes to remove the mill marks left behind by the planer.  That's what a drum sander does.  Consider yourself lucky that you have one...I still don't and it pisses me off every time I pull out the ROS and slap an 80 grit disc on it. <_<

The trick is to use coarser abrasive at first take a light cut with the feed belt rate as high as possible. Learn how much you can take off without stalling or burning. Then switch grits to remove the coarse sanding marks. I mark a board a grid with a pencil and sand until it is almost all gone before I switch to a finer grit.

Your more than likely taking to thick of a pass. Or the conveyor feed rate is to fast. I always run my conveyor speed at the slowest and take a pass. Yes its slow..but the results are well worth it considering other ways to get a board dead flat! 

 

-Ace- 

I run my conveyer on high and lift the drums run the piece while lowering the drums until I hear the out board drum scuff. That is the starting point. Depending on the grits and wood I'll drop my drums and speed for the next pass. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.