Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Why are shoulder and rabbet planes so expensive?

Featured Replies

All of the planes I own save one came from eBay auctions or buy it now purchases. I think after you figure shipping I am at around fifty dollars for the most expensive, all the way up to a decent Stanley 6. Why are shoulder and rabbet planes most all going for over one hundred even on eBay?

I'll take a shot at this.

My guess is there are simply fewer of them out there.

Most woodworkers and carpenters have at least a block plane or two. After that, they usually get a bench plane or two.

Fewer end up getting a shoulder or rabbit plane. The ones who do generally keep them. So, fewer of these planes find their way to ebay.

  • Author

Need was not quite the thing fueling my interest but handiness in the application certainly was. I found my low angle Marples block shaved saw marks and shaped PVC trim quite well. As I tidied up after a rookie, it would have been handy to flush some already installed trim. With the cost, I am now eyeing a used iron to build my own (or at least attempt:-)

Build your own! Build your own!

 

I think it would be cool.

Post picks if you do it.

Am I crazy or could you just turn an old chisel into an iron for a medium sized shoulder plane?

  • Author

I think to do this in wood you need the sides of the iron to narrow for the sidewalls of the body. I would have to start with a really wide chisel unless I tried to skew..... I think I'll start basic rather than skew:-)

Because shoulder and rabbet planes require more (and more precise) milling, since the sides need to be exactly 90* to the sole.  More machine work means more money.  Plus rabbet planes usually have nickers and wider blades.  More money.

Unless I leave one side open and make left and right handed versions. Now you've got me thinking Chet:-)

 

This is totally doable. You can always buy a shoulder plane kit from Hock Tools, but I just made one from scrap wood and a LN rabbetting block plane blade.

Hang in there - I found an old 92 a few months back for $50 if you are really desperate get a new 92 - I hear they perform fine they are just less comfortable to use than the more expensive ones. Amazon is selling a new 92 for $75 - thats pretty good.

 

http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/stanley-sweet-heart-no-92-shoulder-plane

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.