jasonjarrard Posted October 11, 2010 Report Share Posted October 11, 2010 made my first raised panel for drawer front, it will be inset in the face frame, my problem is all sides sit flush to the frame but one corner, it sits about 1/8 inch proud of frame, my panel is slightly warped, what can i do to fix this, will sitting it on a flat surface and weighting it down correct this minor warp. man i wished i had a jointer Quote Link to comment Share on other sites More sharing options...
PaulMarcel Posted October 11, 2010 Report Share Posted October 11, 2010 Any chance for a picture? So when the panel is pressed against the drawer box, one corner is proud 1/8". Depending on thee look of the panel, you might be able to plane/sand flush the offending corner or plane the back side of the rest of the panel to make it flush to the back of the proud corner. Weighing it down will work great if you plan on leaving the weights on after the installation Sorry, we all wish that worked!! Quote Link to comment Share on other sites More sharing options...
jasonjarrard Posted October 12, 2010 Author Report Share Posted October 12, 2010 Any chance for a picture? So when the panel is pressed against the drawer box, one corner is proud 1/8". Depending on thee look of the panel, you might be able to plane/sand flush the offending corner or plane the back side of the rest of the panel to make it flush to the back of the proud corner. Weighing it down will work great if you plan on leaving the weights on after the installation Sorry, we all wish that worked!! going to get pictures up very soon, of my shop and a few projects, thanks for the help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.