Recommended Posts

Posted

Well, I just got a chance to give my brand new Woodpecker's PRL-V2 router lift a good once over.  Am I ever impressed!  Unfortunately since the table for it isn't built quite yet this is just initial pre-use impressions.  This thing is BEEFY!  Much more solid than I anticipated with full 1 inch diameter guide rods and 3/8 inch thick aluminum plate (Compared to the 1/4" I've seen on a lot of models).  Nothing wiggles, nothing jiggles; there's no slop anywhere that I can find.  There are no burrs to be found anywhere and the same can be said of mill marks.  This is the first tool I've ever purchased that has been absolutely, spot on, perfect right out of the box.  It seems that every new tool needs anywhere from a very minor adjustment to a complete re-work.  This is not the case here and I am in heaven!  This quality combined with quick lift capability and .001 micro-adjust has left me grinning ear to ear!

Posted

Terry,

 

  It will hold a Porter Cable 7518 router and reside in a shop made tablesaw extension wing made of two layers of 3/4 MDF with 1 1/2" solid wood banding all around to provide a secure way to bolt the table to the saw and stiffen the table up a bit.

  • Like 1
Posted

Hey tdale, congrats. I have that same lift in which I use a Dewalt 618 and although I can't compare it to other

fits from experience, it has worked well for me..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.