Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

dust collection

Featured Replies

hey guys newbie here.  Just looking for some tips on dust collection  I only have a few main power tools right now (jobsite table saw,small porter cable planer, miter saw and looking to add router table)  but would love some advice.  I dont know the first thing about dust collection  I see alot of people say just get a shop vac and hook up to each tool as you go along.  is this a good way for me to start for now??

hey guys newbie here.  Just looking for some tips on dust collection  I only have a few main power tools right now (jobsite table saw,small porter cable planer, miter saw and looking to add router table)  but would love some advice.  I dont know the first thing about dust collection  I see alot of people say just get a shop vac and hook up to each tool as you go along.  is this a good way for me to start for now??

 

Can't speak for the rest but, that's how I started.  Take your time, do your homework, and make informed educated choices.  There's a lot of options out there!  The shop vac is a good inexpensive way to control that dust while you figure out what you want for the long haul.

Google bill pentz, and be prepared to be scared and overwhelmed with info!

it will work well on the miter saw and router table if designed properly. the other tools would be better served with at least a 1 hp dust collector. shop vacs don't move enough volume for really good collection on a table saw.

I don't know much, but here's some info to get you started:

 

Dust collectors and extractors and air cleaners are measured on how much air they move (Cubic Feet per Minute, CFM) and how much suction force they produce (static pressure).  Picture picking up a tennis ball or a bowling ball with a vacuum hose.  No air is moving, but there's enough force to pick up the tennis ball, but not the bowling ball.  That's static pressure.  Now picture trying to move a tennis ball with a regular window fan.  The fan moves a lot of air, but without much static pressure.

 

The main reason to get dust collection is to protect your lungs.  The visible dust is less of a problem because it gets stuck in your nose and throat and you can cough it up.  The fine dust gets all the way into your lungs and stays there.  A lot of people have systems that cut down on the amount of dusting and sweeping they have to do, but don't really protect their lungs.

 

If you can work outside, or provide a constant flow of dusty air outside and clean outside air into your shop, then you don't need all the filters and stuff.

 

Step 1: get a respirator.

 

Step 2: use a shop vac or dust extractor (fancy shop vac) to collect dust from tools with small dust ports, like sanders.  This will help for the tools you listed.  It won't get all the dust, so keep wearing your respirator.  Use a HEPA filter with a pre-filter (shop vac bag filter).  These have higher static pressure and lower CFM.

 

Step 3: for tools with big dust ports, like the planer and if you get a jointer, you will want a dust collector with a HEPA filter.  It will also do a better job with your table saw, router table, etc.  nothing does a good job or collecting dust from a miter saw, except buying a really expensive miter saw, or building a special enclosure for your miter saw.  Keep wearing your respirator.  If you can exhaust the dust collector outside, then you don't need the HEPA filter.  But there are problems with exhausting outside, so ask first.  You can get a small dust collector on wheels with a short length of flex hose, and hook it to each tool as needed.  Or you can get a powerful dust collector and mount it permanently with permanent ducts to each tool.  These have lower static pressure and higher CFM.

 

Step 4 (optional): build or buy an air cleaner with a timer, and leave it running for a few hours when you leave the shop.  This will collect the fine dust that's hanging in the air that got missed by the dust collector and dust extractor.  These have really really low static pressure, and higher CFM.

I need Bill Pentz to come out with a children's version of his information. Less words and more pictures, I'm overwhelmed by all the words on the page!

Bill's problem is his website is organized like a website form the mid 90's.

I need Bill Pentz to come out with a children's version of his information. Less words and more pictures, I'm overwhelmed by all the words on the page!

Hopefully, this executive summary will help.

1. You need to trap all the dust at the source, otherwise it won't get to the cyclone and filter, and roam about your shop and get into your lungs.

 

2. To capture all the fine (micron-sized) dust at the source, you need a lot of CFM.

 

3. There are many enemies to getting a lot of CFM. One of the big ones is the filter bag clogging up with fine dust.

 

4. To prevent the filter bag clogging issue, you need a way to separate the fine dust before it hits the filter. This is where the cyclone comes in. Taller cyclones provide better separation.

 

5. The problem with a cyclone, or any other preseparator like the Thien baffle, is that you will lose more CFM just by placing it in the stream. That is why large motors and large impellers are needed.

 

Edit: I should note that this is Bill Pentz’s reasoning. I actually take a different approach to dust collection in my shop.

Don't get caught up in cfm. A pipe is only going to move so much air. Most of the 4" machine ports will only move about 450cfm even if the machine requires 650 to collect the dust. The key to good dust collection is big ports and big pipe. You can hook up your 4" port table saw to the biggest and baddest dust collector but its only going to move so much air through the 4" port. More cfm at the collector only lets you run bigger pipe longer distances but if all your going to install is little 4" ports it won't matter how badass your collector is its not going to make any difference.

A decent vac, even with a Thein separator, was able to move enough air on all but my old planer. The key with less air is shorter, more direct runs.

to add to what PB said, the best thing you can do regardless of what machine you get is really plan out your runs. Everything else being equal the shorter & straighter the run the more cfm you will get.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.