Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grizzly 10" table saw G0651 & 8" Jointer G0490

Featured Replies

In preparation for my income tax return :)

I've been looking for a new table saw. I really wanted something with a large table and extension table.

G0651

http://www.grizzly.com/products/10-Heavy-Duty-Cabinet-Table-Saw-With-Riving-Knife/G0651

and to upgrade from my short 6" jointer - something with a larger surface and a larger capacity

G0490

http://www.grizzly.com/products/8-Jointer-with-Parallelogram-Beds/G0490

Anyone have either of these? I know Grizzly has a tent sale coming up in May - which is about 2.5 hours from here. Not sure if it would be worth it to run up and get them, or hold out for an online coupon. Shipping runs $300 for both, plus $34 for liftgate service. Sales tax if I pick it up, comes to $180. So that's a lot of time, and diesel fuel to save $120.

I know last year one of the user forums had a 10% off customer appreciation code. My Grizzly catalog hasn't had the 5% coupon for the last two years. Anyone know if any other catalogs have any coupons?

Sent from my XT1049 using Tapatalk

The g0651 tablesaw is definitely nice, thats their top cabinet saw. If they had made that saw with shorter rails i would have gone with it for sure.

I have found finding a valid Grizzly coupon very difficult at best.  I wouldn't use that as part of you buying equation.  The benefit of going to the tent sales is that you may have the opportunity to buy a scratch and dent model for a decent discount.  If you are going just to save on the freight, I don't think financially you are getting head by much, plus with lift gate service a lot of times the drivers are willing to bring the box/crate right into your garage.

I have both of those machines.  Love the TS minus the fence.  The jointer isn't spectacular but it makes wood flat.

Yeah, Freddie's right...I misread.

 

Once you get up into that price range, I'd start considering SawStop instead.  Grizzly is the budget-friendly brand...if it ain't budget-friendly, not much point.

Eric, you have the g0690 not the g0651 :)

 

 

Yeah, Freddie's right...I misread.

 

Once you get up into that price range, I'd start considering SawStop instead.  Grizzly is the budget-friendly brand...if it ain't budget-friendly, not much point.

Lol, I love how close this forum is where Freddie can tell you what you have in your shop.

  • Author

Yeah, Freddie's right...I misread.

 

Once you get up into that price range, I'd start considering SawStop instead.  Grizzly is the budget-friendly brand...if it ain't budget-friendly, not much point.

 

Yeah but the Saw Stop is about $1500 more for a similar setup.  

I was kind of sold on the sawstop after the woodworking show. the powermatic dealer(the powermatic dealer!) told me the sawstop was the saw to get. My girlfriend saw the hotdog test and said i needed it. When we got home we went to my parents and she told my mom about the sawstop, and she said i should really have that. I just smiled and said sure.

Yeah but the Saw Stop is about $1500 more for a similar setup.  

 

I look at every purchase through the lens of diminished returns.  The 0651 is almost $600 more than the 0690, and for all practical purposes, all I can see you really get for that is more rip capacity.  I'd rather throw that $600 at a tracksaw.  The SawStop is $1500 more than the 0651, but you get a far superior machine to either Grizzly model, and you get to keep your hot dogs.

 

Point being, IMO the 0651 does not pass the diminished returns test.  But that's just my opinion.  Sorry Saw Nazi. :)

No need to apologize eric :) im with you on that 100%. Ill upgrade one day in the future, but until then the g0690 is more than enough saw for my shop.

What does sawstop have against hotdogs? :)

I remember when they first displayed the SawStop technology at the IWF show years ago. Everybody in the room heard a "BANG" and crowded in to see what had happened. They were telling people to come back in 2 hours for the next demo. It wasn't even available yet they were trying to licence the tech to all the manufacturers equally.

  • Author

I look at ...I'd rather ... But that's just my opinion...

If I would have been asking about the Saw Stop then yes I may agree with you. But frankly if I was paying the price of a Saw Stop, I'd buy an American made Unisaw and practice safe sawing.

I want something with a large rip capacity and a large extension table. That is far safer for me than *hoping* electronics work. None of my other tools have that. I don't want complacency.

To me the extension tables are worth the additional cost, which is why I asked for feedback on that saw.

Sent from my XT1049 using Tapatalk

No need to apologize eric :) im with you on that 100%. Ill upgrade one day in the future, but until then the g0690 is more than enough saw for my shop.

 

Again I'm confused.  I thought you had the 0690 like mine, then for some reason I thought you had the 0651.  Either way I think we'd both rather trade up for a SawStop . :)  But I ain't gonna...as soon as I replace this POS fence with the super terrific happy awesome fence, I'll have no complaints with the 0690...as long as I keep my hot dogs out of its way.

Delta is on the fritz, and we dont know how long they will be making cabinet saws. I learned at the show that the new design is flawed with the one piece trunnion and up front controls. Same thing happened with scminlong time ago, and pieces started breaking. I dont know this firsthand, this was information from the powernatic rep. I beleive it tho since my local dealer doesnt carry the unisaw anymore, i think a lot of dealers are dropping it.

If I would have been asking about the Saw Stop then yes I may agree with you. But frankly if I was paying the price of a Saw Stop, I'd buy an American made Unisaw and practice safe sawing.

 

 

You asked for opinions about that saw...I gave mine...which is, if I were gonna pay that price for a Grizzly I'd rather just pay a little more for a SawStop.  And I'd make the argument that a SawStop is a better saw than the Unisaw..."American made" as they partially are...and it doesn't have the safety feature.

 

I don't have a SawStop, and I won't be buying one in the foreseeable future, so I'm not a SawStop pimp.  But if I could go back and make the decision over again before I bought my Grizzly, I may very well have bought one.  Just giving you advice based on my experience.  I'm not expecting you to take it, I'm just offering it. :)

If I would have been asking about the Saw Stop then yes I may agree with you. But frankly if I was paying the price of a Saw Stop, I'd buy an American made Unisaw and practice safe sawing.

I want something with a large rip capacity and a large extension table. That is far safer for me than *hoping* electronics work. None of my other tools have that. I don't want complacency.

To me the extension tables are worth the additional cost, which is why I asked for feedback on that saw.

Sent from my XT1049 using Tapatalk

 

For me not having a cast wing on the right side of the blade would be a deal breaker. No saws are made in the US anymore unless you step up to something like a $14K north field. The unisaw has not been a real made in the US saw for many years.

For me not having a cast wing on the right side of the blade would be a deal breaker. No saws are made in the US anymore unless you step up to something like a $14K north field. The unisaw has not been a real made in the US saw for many years.

What kind of company buys Northfield equipment?

What kind of company buys Northfield equipment?

 

The plant I worked at had an entire custom shop full of it. Now it collects dust and has to sit and watch the CNC's work. :) We had at 4 of everything and 15 guys running it and that was just the custom side. The main operation probably had 20 or 30 of everything with more than 200 employees scurrying around. Now days about thirty guys and a herd of temps run the entire place with CNC's. Times have changed we dont need american heavy metal any more.

The plant I worked at had an entire custom shop full of it. Now it collects dust and has to sit and watch the CNC's work. :) We had at 4 of everything and 15 guys running it and that was just the custom side. The main operation probably had 20 or 30 of everything with more than 200 employees scurrying around. Now days about thirty guys and a herd of temps run the entire place with CNC's. Times have changed we dont need american heavy metal any more.

So what was the benefit of having something like a Northfield? Was it practically indestructible as compared to a Powermatic? Or just people who buy it are very patriotic?

 

I would like to just see one of those machines in person.

So what was the benefit of having something like a Northfield? Was it practically indestructible as compared to a Powermatic? Or just people who buy it are very patriotic?

 

I would like to just see one of those machines in person.

 

Its about the right tool for the job. Cutting 8/4 stock on a big saw is a completely different thing than cutting it on little 3 hp cabinet saw. You can't feed a big saw as fast as it will cut. With small saws every cut is forced to some degree. Its just a completely different experience woking with tools that were made to do the job rather than improvised.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.