WoodcuTT3R Posted March 15, 2014 Report Posted March 15, 2014 I just got my new shelix head for my DJ20 !!! Anyone know where to find information on removing old cutter head and installing new? It looks like it should almost just slide right out but the corners of the mounts just wont quite clear the table. Quote
PaulMarcel Posted March 15, 2014 Report Posted March 15, 2014 Have you searched YouTube? Bet there's one there Quote
Guest Posted March 15, 2014 Report Posted March 15, 2014 I did it on my powermatic jointer... my instructional manual had directions for removing the cutterhead. If you dont have your manual see if you can find one online. It was much easier than expected. Do you have a set of bearing pullers? much easier if you do. Quote
Jfitz Posted March 15, 2014 Report Posted March 15, 2014 Chris Wong over at Flair Woodworks documented his replacement. http://flairwoodworks.com/2009/05/21/installing-a-shelix-cutter-head/ 1 Quote
WoodcuTT3R Posted March 15, 2014 Author Report Posted March 15, 2014 So I looked at the link provided by Chris. Lots of good information there. I've sort of began the process of prying the mounts away from the head. Hope that's not a huge oops Chris !!! No help with the manual from Delta. Also halfinchshy your blog was not found by my server. Thanks all for your response. I'll let you know how it turns out. Quote
PaulMarcel Posted March 15, 2014 Report Posted March 15, 2014 Thanks for letting me know; probably been broken awhile! New registrar for some reason requires the www and I had it in there without it (which previously worked). All fixed Thanks again... Quote
prov163 Posted March 18, 2014 Report Posted March 18, 2014 WoodcuTt3R, Rollie Johnson has a great video on putting in a segmented cutter head. It's not on the DJ-20, but very informative. I've got a DJ20 which I hope to change over this Fall. Please let me know how it goes and what you think about the final product. Sent from my iPad using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.