intelligen Posted March 18, 2014 Report Posted March 18, 2014 I'm just starting to buy my hand tools so I'm getting some sharpening gear too. I'm planning to use diamond lapping plates with coars, fine, and super-fine mesh, probably the 8"x3" size from DMT or EZE Lap. I see they also come in double sided or single sided, with different mesh/grit on each side. What are the pros and cons of each? Quote
wtnhighlander Posted March 18, 2014 Report Posted March 18, 2014 Many prefer single sided stones / plates so they can be (semi-) permanently mounted in some sort of jig or table top surface for quick access. Quote
intelligen Posted March 18, 2014 Author Report Posted March 18, 2014 That makes sense. Is there any difference in the durability between double-sided and single-sided, or are they pretty much the same aside from just having abrasive surfaces on both sides? Quote
wtnhighlander Posted March 18, 2014 Report Posted March 18, 2014 For a stone you would be dishing out and re-flattening both sides, so the whole thing wears faster. Diamond plates probably makes no difference. I'm making assumptions, as all my sharpening media is single sided. Quote
Countryside Workshop Posted March 18, 2014 Report Posted March 18, 2014 DMT double sides doesn't matter about wear. And they make a mount for the double sided so you can flip it around. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.