Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

prevent checking when air drying wood

Featured Replies

One of my neighbors cut down a 100 year old Oak and I managed to snag a chunk. I rough cut out a stool with a chainsaw and now I want to let it air dry before bringing it down to its final dimensions and finishing it. I noticed there was some checking though. How should I deal with the small checking? Should I put epoxy into the checks to prevent it from propagating? Should I put some polyurethane on the end grain to seal it up so the wood drys in a more uniform fashion? Any help would be greatly appreciated. Thanks so much.

What's up Kiki? Unlike you to be so concise and to the point :)

  • Author

Thanks for the replies =) The stool is about 20 inches long, 12 inches deep and 23 inches high. I cut out the core of the log so I don't have the heart of the tree anymore. I hope this will help to reduce the checking as the wood dries.

  • Author

Does the Anchorseal 2 Green wood sealer interfere with finishing? I plan to finish with a sealer coat of shellac and then poly over top of that but I don't want to be forced to cut off half an inch off the ends to get back the green wood sealer. Since I plan to first finish with shellac later is it possible to just seal up the end grain with shellac now to protect against checking?

Green wood sealers are flexible, shellac is not, your piece will shrink as it drys, this will cause a rigid surface treatment to fail. I lack the experience some of these guys have, but some checking will happen even with the best prep work. This is why we try to leave things over sized in their wet state. If you are too close to your desired size already, you may end up disappointed and need to trim that half inch. Do you have the capability to make a solar kiln? In principle, even if you did not intend to set it in the sun as a kiln, you could use it to control the humidity around the piece you are drying.

  • Author

Thanks so much C Shaffer for the great explanation. I will buy the Anchorseal 2. Thanks to everyone else as well =)

 

Green wood sealers are flexible, shellac is not, your piece will shrink as it drys, this will cause a rigid surface treatment to fail. I lack the experience some of these guys have, but some checking will happen even with the best prep work. This is why we try to leave things over sized in their wet state. If you are too close to your desired size already, you may end up disappointed and need to trim that half inch. Do you have the capability to make a solar kiln? In principle, even if you did not intend to set it in the sun as a kiln, you could use it to control the humidity around the piece you are drying.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.