Recommended Posts

Posted

or should I say I don't know why tools feel better to me at some times than others.  When I closed up my shop at Fort Riley I was using my LV BU Jointer as often as I could.  Of my first two metal bench planes, I loved my LV 4 1/2 BD and ended up sending back my LN #5.

 

Fast forward, finally got my shop back here in Lubbock to a real usable shape.  The only plane that I want to use is my LN 62 BU Jack.  The others* are fine but I just seem to be getting better results with the #62.  Blades should all be relatively sharp (or at least equally so).

 

Funny how things ebb and flow.  Have you had times like that - where one tool just feels better in the hand than others?

 

BTW, Got my moxon up and running (or should i saw holding fast).  Good work holding sure makes things nicer.

 

*LV 41/2, 5 1/4, BU Jointer

Posted

They all feel right at the right times and wrong at the wrong times.  Depends on what you're doing with them and on what species.  Which means I don't really have a preference since it's just a matter of which tool performs best for a particular task.

 

I do have to say I like having that shiny bronze in my hand when I use my LN#4. :)

 

But I'd rather use my 62 if I'm shooting miters.  Because it works better.

Posted

Otay Kiki, think you might be right.  Went back out to work some more - this time taking the bow out of a board meant for the top of a small table.  Went to traversing and the LV 5 1/4 felt much better in my hand than the LN #62.

Posted

They all feel right at the right times and wrong at the wrong times.  Depends on what you're doing with them and on what species.

Perfectly true. Unfortunately I also have planes which feel wrong at the right times. I know, I know, they're just hunks of metal (or wood), but I've given most of them names... There's probably a good mechanical reason (without getting into pychology) why this happens, but sometimes I just have to wait for a better day and use something else, or do different work.

 

Right now my #7 - 'Miss Americana' is sulking (this is a specific woodworking term for a tool that I just can't get quite right), though she's been working excellently for months... Perhaps today she's feeling better.

 

John

  • Like 1
Posted

Yes! All the time. Certain planes just feel better for certain things.

I have an old stanley jack that is set up as a jack should be, cambered blah blah.... The LN 62 is set almost square, and I use it kind of like a short jointer or for shooting.

So when I need to remove material quickly, but not as quickly as a scrub plane would, I reach for my stanley. A good example is leg tapers. I do mine by hand. I draw my lines, and grab the stanley and get close to the line. Then I grab the LN 62 and just touch the line and finish up with my LN LA smoother.

Posted

I figure wood planes have seasonal movement - that's why my woody jointer feels so good now and not so good in Kansas I reckon.  But metal shouldn't - should it?

 

Started on my second board to take out bow and the LV 5 1/4 just wouldn't repeat it's performance last night.  So when I get my arms back in a bit it's off to rotate through the arsenal - think I'll start with the woody just for the sake of it.

Posted

or should I say I don't know why tools feel better to me at some times than others.  When I closed up my shop at Fort Riley I was using my LV BU Jointer as often as I could.  Of my first two metal bench planes, I loved my LV 4 1/2 BD and ended up sending back my LN #5.

 

Fast forward, finally got my shop back here in Lubbock to a real usable shape.  The only plane that I want to use is my LN 62 BU Jack.  The others* are fine but I just seem to be getting better results with the #62.  Blades should all be relatively sharp (or at least equally so).

 

Funny how things ebb and flow.  Have you had times like that - where one tool just feels better in the hand than others?

 

BTW, Got my moxon up and running (or should i saw holding fast).  Good work holding sure makes things nicer.

 

*LV 41/2, 5 1/4, BU Jointer

 

Never liked the feel of bevel up planes and have been surprised by their surge in popularity.  Probably all in what one gets used to.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined