Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

thinking about buying a PM2000

Featured Replies

Well, there is a good chance I will be selling my tablesaw, so i will need a new one.  I want this saw to be the last TS i ever buy.  I was thinking the 3HP Powermatic PM2000.  Anyone have some opinions on this saw?  I know the SS is its main competitor, so I am open to the that too.

 

Let me have it!  The good, the bad, the ugly!

There may be some Kool-Aid factoring in here...but I think at this point it's a no-brainer to go SS if you're looking to drop PM money.  They're both quality saws.  One of them will cut your fingers off.

 

Disclaimer: I don't own either.

Between the NSA, CIA, Amazon and google, wife, two kids, two houses...and a little woodworking here and there and the occasional fly fishing trip...I'm booked. :D

I own a SawStop 3HP PCS but don't plan on picking it up for a couple of months until my new shop is built. I am perfectly happy with my Steel City cabinet saw but my wife told me I should get a SawStop for the new shop. A local dealer has both the 3HP PCS and PM2000 on the floor next to each other. No doubt the PM2000 is a beast and probably compares more to the SS ICS. I know the owner of the local dealer and had already purchased the SS from them. I asked him which is his best selling cabinet saw and he said easily the SawStop's (PCS and ICS). He said he mainly sells the PM2000 to cabinet shops who have been using Powermatic's all along. He did say there are cabinet shops using the SS PCS and he hasn't heard of any problems with them. 

 

In addition to the obvious, the SawStop really has some nice features. I'm very careful every time I used my table saw but also know that distractions and being tired are big factors to TS injuries. I've had a friend knock on the door while ripping, my wife came in and scared the crap out of me while ripping, a wasp land in my hair, and so on. For me, the unexpected things that can happen is why I bought one to put the odds in my favor. 

 

I've built the same quality furniture with my Jet contractor saw as I do with my Steel City cabinet saw so I'm confident the SawStop PCS will be just fine. I know people like to compare trunnions, but if the saw operates smoothly, stays adjusted, and cuts great that's all I care about. 

I just bought a 3hp PM 2000 last month.  Had a dedicated 20a 220v installed for it.  I'm in love with it.  20amp has proved to be just fine for me as long as nothing else is on the circuit. 

 

My reasoning for not buying the saw stop was primarily paying another 200 for a rolling base.  The PM 2000 has the retractable casters that you can't see.  For a 700lb saw, it's darn convenient.  Of course the Powermatic sale is what really sold me.

 

Most of my tools are mid-grade.  Now that I have a quality table saw, I use it for everything.  It's the tool I trust the most for accuracy.  I just know it'll be perfect and square every time.

 

Small chamfers I'd make at the router - tablesaw. 

Cross cuts I used to make at the mitre saw - tablesaw. 

Dados and rabbits - tablesaw.

 

Ripped 8 foot 3/4" MDF.  Square.

Resawed 4/4 maple beautifully.

Dust collection is excellent. Even before I had the dust collection system, I'd just prop a 5 gallon bucket up to the extraction hole.  I swear it collected 95% of it.

Dust collection with a zero-clearance insert is an absolute mess...especially with plywood.

 

Came with 2 riving knives, one of which is below the blade for non-through cuts.  Changing them out is easy (there's a red lever), and they're always square,

 

Once adjusted, the fence magically seems to lock in square every time.  I don't know how it does it, since it's wobbly when you're moving it, and then BAM, it's locked down at 90 degrees.

 

Complaints (albeit esoteric)

 

Changing to the dado stack is a royal pain.  Getting my hands (which are small) into the machine, and using my fingers to slide the blades in/out, is a challenge, and the blade hangs on every groove on the way out.  I recall the saw stop having a feature where it rose up out of the machine for easy blade change?  I couldn't imagine doing it with giant hands or big sausage fingers. :D

 

I stripped both nylon (fence adjustment) screws on the rail on day one.  Powermatic, however, sent me replacements NEXT DAY.  I received them in less than 16 hours from when I called.  That was pretty cool.

 

I had a lot of thin metal shavings show up the first few days I used it.  I think it was just the fence grinding on the thin metal trim on the rail ruler tape, but I'm not sure.  Haven't seen it since.

 

 

The on/off button:

First, it's on the left of the table.  This drives me nuts, because I'm usually standing more to the right of the blade, away from the offcut.  Every time I shut it off I'm worried that in the 2 seconds I reach for that button is when I get drilled in the chops with a kickback. :wacko:

Second, even though I consistently unplug the cord, something about that on switch location still scares me.  There have been plenty of times when I've reached across the table to grab my piece after the blade has come to a complete stop, and my hip is against the button.  Now, it's inset between the off button, but if something is sticking out of my pants (insert joke here) I'm in big trouble.

 

It also seems like the blade takes FOREVER to come to a complete stop.  With multiple cuts or batch work, a lot of time is spent waiting for the blade to slow down.  (This might be unique to me...after experiencing a few kickbacks trying to move the offcut away from a spinning blade, I stopped doing it.)

 

Any errant finish or polish will tarnish the steel top.  Keep it far away from your finishing table.  It's only aesthetic, but it drives me bananas.

 

The auxiliary table would make so much more sense to me if it was on the left of the blade, as it would support longer pieces for cross cuts.  It's made to fit on the right, so you'd have to remove the fence.  I still can't figure that one out.

 

This isn't a complaint, but setting up the top is a 2 man job.  I did it by myself, and it was a 2 day process. Think it could have been a half day with someone else there.  I still haven't attached that additional (plywood?) auxiliary table that they also include. 

 

Also, it looks three times bigger in my basement than it did at the store. 

 

If it gets delivered, have a plan and some help.  Have a few sawbucks for the delivery guy to get it from "curbside" to your shop.  Build a ramp and roll up those casters to get it off the wooden pallet.  Have a crowbar handy for the pallet.

 

if you're in the Atlanta area, you're more than welcome to come give it a test drive.  Or, I could facetime you and show you anything you'd want to see up close (insert joke here).    PM me.

  • Author

I just bought a 3hp PM 2000 last month.  Had a dedicated 20a 220v installed for it.  I'm in love with it.  20amp has proved to be just fine for me as long as nothing else is on the circuit. 

 

My reasoning for not buying the saw stop was primarily paying another 200 for a rolling base.  The PM 2000 has the retractable casters that you can't see.  For a 700lb saw, it's darn convenient.  Of course the Powermatic sale is what really sold me.

 

Most of my tools are mid-grade.  Now that I have a quality table saw, I use it for everything.  It's the tool I trust the most for accuracy.  I just know it'll be perfect and square every time.

 

Small chamfers I'd make at the router - tablesaw. 

Cross cuts I used to make at the mitre saw - tablesaw. 

Dados and rabbits - tablesaw.

 

Ripped 8 foot 3/4" MDF.  Square.

Resawed 4/4 maple beautifully.

Dust collection is excellent. Even before I had the dust collection system, I'd just prop a 5 gallon bucket up to the extraction hole.  I swear it collected 95% of it.

Dust collection with a zero-clearance insert is an absolute mess...especially with plywood.

 

Came with 2 riving knives, one of which is below the blade for non-through cuts.  Changing them out is easy (there's a red lever), and they're always square,

 

Once adjusted, the fence magically seems to lock in square every time.  I don't know how it does it, since it's wobbly when you're moving it, and then BAM, it's locked down at 90 degrees.

 

Complaints (albeit esoteric)

 

Changing to the dado stack is a royal pain.  Getting my hands (which are small) into the machine, and using my fingers to slide the blades in/out, is a challenge, and the blade hangs on every groove on the way out.  I recall the saw stop having a feature where it rose up out of the machine for easy blade change?  I couldn't imagine doing it with giant hands or big sausage fingers. :D

 

I stripped both nylon (fence adjustment) screws on the rail on day one.  Powermatic, however, sent me replacements NEXT DAY.  I received them in less than 16 hours from when I called.  That was pretty cool.

 

I had a lot of thin metal shavings show up the first few days I used it.  I think it was just the fence grinding on the thin metal trim on the rail ruler tape, but I'm not sure.  Haven't seen it since.

 

 

The on/off button:

First, it's on the left of the table.  This drives me nuts, because I'm usually standing more to the right of the blade, away from the offcut.  Every time I shut it off I'm worried that in the 2 seconds I reach for that button is when I get drilled in the chops with a kickback. :wacko:

Second, even though I consistently unplug the cord, something about that on switch location still scares me.  There have been plenty of times when I've reached across the table to grab my piece after the blade has come to a complete stop, and my hip is against the button.  Now, it's inset between the off button, but if something is sticking out of my pants (insert joke here) I'm in big trouble.

 

It also seems like the blade takes FOREVER to come to a complete stop.  With multiple cuts or batch work, a lot of time is spent waiting for the blade to slow down.  (This might be unique to me...after experiencing a few kickbacks trying to move the offcut away from a spinning blade, I stopped doing it.)

 

Any errant finish or polish will tarnish the steel top.  Keep it far away from your finishing table.  It's only aesthetic, but it drives me bananas.

 

The auxiliary table would make so much more sense to me if it was on the left of the blade, as it would support longer pieces for cross cuts.  It's made to fit on the right, so you'd have to remove the fence.  I still can't figure that one out.

 

This isn't a complaint, but setting up the top is a 2 man job.  I did it by myself, and it was a 2 day process. Think it could have been a half day with someone else there.  I still haven't attached that additional (plywood?) auxiliary table that they also include. 

 

Also, it looks three times bigger in my basement than it did at the store. 

 

If it gets delivered, have a plan and some help.  Have a few sawbucks for the delivery guy to get it from "curbside" to your shop.  Build a ramp and roll up those casters to get it off the wooden pallet.  Have a crowbar handy for the pallet.

 

if you're in the Atlanta area, you're more than welcome to come give it a test drive.  Or, I could facetime you and show you anything you'd want to see up close (insert joke here).    PM me.

Thanks for the offer, but I'm quite a long distance from Atlanta!

Sounds like you are pretty happy with the machine. Thanks for your input.

We used to have 4 PM2000 (3 phase 5HP), and 2 Unisaws (1PH 3HP) and the Powermatics are very nice saws.  Two years ago we took out the Unisaws, kept 1 PM2000 but replaced all the other saws with SS Industrial (3Phase 5 HP).  There are several students who are very happy that when they made a mistake that we had SS.  Just 2 weeks ago we had a student making a relief cut for re-sawing when the board fell over during the cut and dropped his index finger right into the spinning blade.  His finger had a slight superficial scratch on the skin, his shorts were ruined though.  On that basis alone I would get the SawStop and I've been woodworking 30 years without an accident on any piece of machinery.

 

As I said the PM2000 is a very nice saw but the SS is still a nicer machine, I know I'll catch some poop for saying that but if you get a chance to use both machines I think you will see the difference.  When I get the extra cash I will add a SS to my shop, plan on keeping the Unisaw for wet wood and dado cuts.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.