Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Outfeed table

Featured Replies

Needed an outfeed table for my new table saw. Built this one today based upon Norm and Marks table. The top isn't attached and there is still some detail and finishing work to do, but the heavy lifting is done. Posted Image

Looks like a good sturdy table that should last a long time!  Nice job.

You probably used levelers, but want to add it for the next WTO member who comes along...

 

BTW, I forgot levelers on my outfeed/assembly table.... D'Ohhhhh... Hate when that happens....

 

Actually found some that were easy to retrofit... Not the ideal choice, but they can be used for a retrofit job which was the goal at the time...

 

http://www.rockler.com/screw-on-tee-nuts-choose-size-thread

http://www.rockler.com/plastic-leveler-glides

==>These are the levelers I used on my table..

Yea, those are the ones I would have used --- had my thinking cap been on at the time...

  • Author

Waiting on my leg levelers to show up, ordered them from Rockler.  Left myself enough room on the height to install them.  Just about had a minor catastrophe with the dust collection, but it worked out without any modification.  

 

I would like to trim it out in a secondary wood, any advice on what would look good with the red oak ply?  Nothing expensive, but I am going to have to buy something anyway as I don't have enough of any hardwood laying around.   

 

 

How ya liking that new saw


Sent from my iPhone using Tapatalk

 

I really love the saw.  It was a breeze to get setup which is a lot more than I can say about my old saw.  It will be a lot more functional once I get some jigs made.  A crosscut sled is the first thing on my list after this table is done.  Looking for a Big Router for extension table before I spend to much time setting up the fence and guard for it.  

==>trim it out in a secondary wood, any advice on what would look good with the red oak ply?

Wait for your next project and over-buy a stick...

 

For shop furniture, I usually go with Hard Maple (J1450) or harder... I've got Hard Maple on most of it, but I've also got Padauk, Purpleheart and Bloodwood. Really just what ever I had at the time...

 

I also put a sizable bevel (say 3/8) for all those little dings that seem to happen in a shop...

You'll like those!  Super easy to install and adjust.

 

I cut off an allan wrench and just leave it in one of the legs.  That way I always know where to find it on the rare occasion I need it.  Just cut it about 1/8 from the corner on the short side.  This way you're not hitting it with your foot.

 

As for trim, I have to agree with TripH - I like hard maple..  

  • Author

The problem with waiting for my next project, is it will probably never get finished.  I have multiple pieces of shop furniture, in use but without any finish.  I just never get around to it once I start using them!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.