imcmahon Posted May 29, 2014 Report Share Posted May 29, 2014 I'm likely going to have to move across the country for work, and so begins the Great Purge! Here's the first batch; all my new premium hand tools: LN scrub plane LN low angle jack LN low angle jack rabbet LN rabbeting block plane LN large open throat router WoodRiver low angle block WoodRiver #4-1/2 smoother WoodRiver #7 jointer Veritas plow plane with 5 imperial sized irons Hock kit smoother, built Hock kit shoulder plane, built ECE stopped rabbet plane LN 3/8" mortise chisel LN 3/4" bevel chisel LN 1/2" long handle O1 paring chisel LN tenon saw Veritas Crosscut Carcase saw Veritas Rip Carcase saw Narex 5/8" mortise chisel Narex 40mm bevel chisel Titemark marking gauge 2x 1x woodcraft marking gauge Also, not new and/or less premium: Anant #8 jointer very old Stanley bedrock #606 in good condition All but a handful of the tools pictured here are sold. Everything that's left is in the new "Round 2" post, go check it out! -Ian 1 Link to comment Share on other sites More sharing options...
SMeekWoodworks Posted May 29, 2014 Report Share Posted May 29, 2014 I'm interested in the TiteMark and also possibly your Shapton stones. Link to comment Share on other sites More sharing options...
Countryside Workshop Posted May 29, 2014 Report Share Posted May 29, 2014 (edited) I'm interested, I see you have a router plane but you don't have it listed. Edited May 29, 2014 by Countryside Workshop Link to comment Share on other sites More sharing options...
RileyRasmussen Posted May 29, 2014 Report Share Posted May 29, 2014 I'm in tucson are you willing to ship and accept paypal? I want the low angle jack plane Link to comment Share on other sites More sharing options...
imcmahon Posted May 29, 2014 Author Report Share Posted May 29, 2014 I'm interested, I see you have a router plane but you don't have it listed. It is in the list, but it's spoken for. Sorry! Link to comment Share on other sites More sharing options...
RileyRasmussen Posted May 29, 2014 Report Share Posted May 29, 2014 I would like to make you a deal on the LN low angle jack plane and the rabbeting block plane. E mail me at rileyrasmussen@yahoo.com Link to comment Share on other sites More sharing options...
Shane Jimerfield Posted May 29, 2014 Report Share Posted May 29, 2014 I was going to join the Guild today to celebrate finishing a table, but I just spent the cash on a LN Jack Rabbet. Thanks Ian and sorry Marc Link to comment Share on other sites More sharing options...
Shane Jimerfield Posted May 29, 2014 Report Share Posted May 29, 2014 Ian, there is some chatter over at the WoodWhisper FB page. Apparently some folks can't reach you. https://www.facebook.com/thewoodwhisperer Link to comment Share on other sites More sharing options...
brooklyngohardwood Posted May 29, 2014 Report Share Posted May 29, 2014 If the Rabbiting Block Plane is still available I'm very interested. Was close to ordering one new. Link to comment Share on other sites More sharing options...
imcmahon Posted May 29, 2014 Author Report Share Posted May 29, 2014 Ian, there is some chatter over at the WoodWhisper FB page. Apparently some folks can't reach you. https://www.facebook.com/thewoodwhisperer Whoa! I'm not sure what's going on, I don't see any indication that anything is locked and I'm responding to PMs as fast as my little fingers can carry me! Link to comment Share on other sites More sharing options...
Shane Jimerfield Posted May 29, 2014 Report Share Posted May 29, 2014 well I put your email address up on the FB page. I'll delete it if you want me to. Link to comment Share on other sites More sharing options...
Bkane Posted May 30, 2014 Report Share Posted May 30, 2014 I'm interested in the lie Nielsen 1/2 bevel chisel…let me know if it's still available. Link to comment Share on other sites More sharing options...
imcmahon Posted May 30, 2014 Author Report Share Posted May 30, 2014 I'm interested in the lie Nielsen 1/2 bevel chisel…let me know if it's still available. All chisels are still available, however I had them mislabeled. What I have is: LN 3/4" bevel chisel LN 1/2" O1 long handle bevel chisel LN 3/8" mortise chisel PM me if you still want one of them, let me know which. Link to comment Share on other sites More sharing options...
Peloftus Posted May 30, 2014 Report Share Posted May 30, 2014 Interested in the LN chisels, narex mortise chisel and the hock smoother. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Spunjin Posted June 2, 2014 Report Share Posted June 2, 2014 I got the goods today. Thanks, Ian. Spunjinworks.wordpress.com Link to comment Share on other sites More sharing options...
imcmahon Posted June 2, 2014 Author Report Share Posted June 2, 2014 I got the goods today. Thanks, Ian. Spunjinworks.wordpress.com Great, enjoy! Link to comment Share on other sites More sharing options...
Recommended Posts