Recommended Posts

Posted

I'm giving serious thought to taking advantage of Jet's current sale before it ends today. I'm on the fence on whether to go with the Jet 628900 10-20 Bench Drum Sander or the 708404 Bench Oscillating Spindle sander.

I've been using the little sanding drums on my drill press for a while in lieu of a spindle sander. It works OK, though it doesn't wear the sandpaper evenly and seems like it might be hard on the drill press over time. I have a planer (realizing that the drum sander doesn't exactly serve the same purpose). I can see myself using either the drum or spindle sander quite a bit and it's honestly hard to say which one I would get more use out of.

 

I suppose either of these would be something of a luxury or convenience purchase, but if you were going to pick one over the other, which one would you go with and why?

Posted

It's really an apples to oranges thing to me and can't necessarily choose one over the other, very different sanding purposes. In a nutshell, the spindle sander is great on curves/edges while the drum sander is better at sanding/flattening faces. If you find yourself doing one or the other more often, then that's a hint on what to go with.

Posted

And that's fair. I guess I look at somewhat as which application is easier to work around. In a perfect world maybe I'd get both, but I'm a little tight on space already so that starts to become impractical. My leaning is to say the oscillating spindle sander would make more sense for me simply because it seems like it is more difficult to efficiently sand curves another way (sure you can do it by hand, but that's tedious). sanding and flattening faces, for my purposes, could probably be done either with a handheld sander, plane, the power planer or a combination of those. 

Posted

So I would do the drum sander and then look for a bench top spindle sander..  

 

I'm missing the drum sander and have the spindle sander.  I miss that drum sander on just about every project!

  • Like 1
Posted

I have the 10-20.  Get the 16-32 instead.  It's not that much more and it includes the stand.  The 10-20 is too heavy to be a bench top tool so you are either going to pay an outrageous amount of money to buy the stand separately or build one yourself.

 

For a spindle sander there are plenty of cheaper perfectly serviceable options than the Jet.

Posted

Agree with everyone else...apples and oranges.  Kind of like asking if you should buy a hammer or a tape measure.

 

The drum sander is a much bigger time saver.  That's what I'd pick if I had to make a choice...unless you enjoy cleaning off mill marks with a hand plane or a ROS or you do a ton of curves.  I'd also take krtwood's advice and get a larger one.  In fact I'd stay away from benchtop models of any tool...except, possibly...ironically...a spindle sander.  A lot of guys have the Ridgid benchtop OSS and like it.  There are other benchtops available but many of them cost as much or more as floor-standing Grizzly units.  Floor-standing is always better, IMO...even if it's a Grizzly.

 

Another point about the OSS...it's a nice luxury tool to have, but it doesn't produce a fair curve, so there's always going to be more work to do after the OSS.  In the meantime you could buy a spokeshave and get closer to your lines with that until you buy the OSS.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 44 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined