pghmyn Posted June 14, 2014 Report Posted June 14, 2014 I am in the process of cleaning out my late grandfather's garage. He has a hoard of things in this garage. Piles of just...stuff. I saw in the way back the outline of a rather large lathe. I'd say it is about 5-6 feet long. Looks to be in decent shape, although I couldn't really confirm that at the time. There is just too much stuff between me and the tool. I don't know if there is a motor attached to it, but he does have a wall of motors that could be affixed to it if need be. I'm not expecting much out of this, but would be nice to have a "starter lathe" to see if I like turning and want to pursue it further. I don't know how long it will be before I get to it, as I have a lot going on right now, but it is on my list! Can you guys give me a list of things to look for and check before I even plug it in? 1 Quote
tim0625 Posted June 15, 2014 Report Posted June 15, 2014 Some of the old stuff is built like a tank. May be a real find. Run the tail stock up to the head stock to see if they align. Check the lathe bed to see if it's flat - probably is. Check the head stock spindle to see if it has play as the bearings may need replacing and surprising enough, NAPA may have a bearing they can match up. They did for my 50 yr old lathe. Blow the motor and the switch really good with compressed air before starting to get all of the dust out. Hopefully it's 110v or 220v. The plug should tell you something. Being that big of a lathe, and if the motor works, it's probably a larger motor. If it's bad, you don't necessarily need one that large... kind of depends on if you think you'll turn very large stock. Seeing your grandad had a "wall of motors", my guess is he left it good in working shape. Good luck moving it. Friends, pizza, you know the deal. Quote
wdwerker Posted June 15, 2014 Report Posted June 15, 2014 Give an old motor a sniff first. Burned up wiring on old stuff has a fishey kinda odor to me. Quote
woodieboy Posted June 18, 2014 Report Posted June 18, 2014 Check the headstock to tailstock alignment. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.