JoshC1501 Posted June 15, 2014 Report Posted June 15, 2014 Got a 1/2" wood slicer awhile back for my bandsaw. Set it up last night. I hate changing bandsaw blades. Never could get the resaw king blade to work right. Not sure my bandsaw can really handle that blade, or my tuning skills stink. What a great blade. Gives reasonably clean cuts on rips and crosscuts. Better than the 3/8 Timberwolf I had on there. Resawed a piece of cherry and it was near flat. Two passes on the joiner cleaned it right up. Very happy customer. Josh. 1 Quote
Nick2cd Posted June 15, 2014 Report Posted June 15, 2014 Josh, I had the same experience with the wood slicer 1/2" blade. It was as if I was using a different saw. Blew me away. How are u liking that 1412 now that you've had some time with it? Quote
JoshC1501 Posted June 15, 2014 Author Report Posted June 15, 2014 Josh, I had the same experience with the wood slicer 1/2" blade. It was as if I was using a different saw. Blew me away. How are u liking that 1412 now that you've had some time with it? 1412? Quote
Keggers Posted June 15, 2014 Report Posted June 15, 2014 I'm not intending to steal this thread, but I do have a question about bandsaw blade widths. I just looked at the Wood Slicer blades and they all seem to be made for resawing. I don't do much resawing, but I do use my bandsaw alot to cut off bad edges on the lumber I sell. Since I almost always cut in a straight line, is there any advantage to using a 1" wide blade as compared to a 1/2" or 3/4"? I've always used blades with three teeth per inch and usually 1" wide. It's time I was ordering some new blades and this thread got me to thinking about blade widths and if I'm wasting my money on a blade that is wider than I need. Any help here will be most appreciated. Quote
Barron Posted June 15, 2014 Report Posted June 15, 2014 My somewhat limited experience is that wider blades track better and are a little easier to set up. I have also found that while woodslicers are great for ripping and resawing, they are not as good on curves. I think if your saw can handle 1" blades and you are ripping frequently, stay with them and just change blades when cutting curves.. 1 Quote
Nick2cd Posted June 16, 2014 Report Posted June 16, 2014 1412? I thought I recalled you purchasing a Laguna 1412 bandsaw a few months back. No? Quote
Nick2cd Posted June 16, 2014 Report Posted June 16, 2014 I thought I recalled you purchasing a Laguna 1412 bandsaw a few months back. No? My mistake. It was Josh G who purchased that saw. Sorry, wrong Josh. Quote
Coop Posted June 16, 2014 Report Posted June 16, 2014 Got a 1/2" wood slicer awhile back for my bandsaw. Set it up last night. I hate changing bandsaw blades. Never could get the resaw king blade to work right. Not sure my bandsaw can really handle that blade, or my tuning skills stink. What a great blade. Gives reasonably clean cuts on rips and crosscuts. Better than the 3/8 Timberwolf I had on there. Resawed a piece of cherry and it was near flat. Two passes on the joiner cleaned it right up. Very happy customer. Josh. Josh, Good to know. I just received mine via priority mail today in it's orange wrapper. Looking forward to using it on my Morris chair build. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.