Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How long should i wait?

Featured Replies

I want to use general water based High Perf Poly over an oil based minwax stain.  How long should I allow the oil based stain to cure before I spray on the water bourne poly?

 

I was thinking a week.  Is that enough time?

I have cheated and after 24-36 hours I put on several very fine almost dusting coats. What happens is the tiny droplets splatter and stick to the wood fibers without really forming a continuous film. Let each coat dry 15- 20 minutes and spray it again. When you have built up a fairly continuous base lightly buff with an abrasive pad and start your usual finishing procedures. Use thin coats and let each one dry thoroughly .

You might want to try a test panel to see how it works for you. After your finish has completely cured cut an " X " in the middle of the test panel with a razor knife. If the film lifts at the points then you know the finish didn't adhere.

If you can still smell the spirits base of the stain or you put on heavy coats of stain let it dry longer. If a piece of paper can be laid over the stain, hold the paper still, wipe a finger across the paper and see if the stain transferred to the paper . When the paper comes away pretty clean you are good to go.

==>I was thinking a week.  Is that enough time?

Usually 3 days for me.

 

To increase my margin of error, I usually add a dryer to oil coats -- either a purpose-made or Japan -- either way it doesn't cost much and provides a belt/suspenders timeline...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.